Ayuda de vídeo de Screencast

bptestbpcd

Created: 25 Enero 2013 • Updated: 17 Marzo 2013 | 4 comments
Se ha solucionado este problema. Vea la solución.
# bptestbpcd -host fred -connect_options 0 0 2
0 0 2
10.0.0.32:748 -> 10.0.0.59:13782
10.0.0.32:983 <- 10.0.0.59:635

Example 2 - A connection from the server fred is tried to the client wilma by using the vnetd port number if possible:

# bptestbpcd -M fred -client wilma -connect_options 2 2 0 1 1 1
10.0.0.59:40983 -> 10.0.0.104:13724
10.0.0.59:40984 -> 10.0.0.104:13724
10.0.0.59:40985 -> 10.0.0.104:13724
 
This command will make connections to client on the vnetd port instead of pbx?
And from next time backup will use vnetd port to connect to client?
 
 
NBU 7.1

Comentarios ComentariosIr al último comentario

el cuadro de los Nicolai

The connect option only apply to the connection bptesbpcd is about to perform.

If you want the connect option to be permanent you have to place the option in bp.conf on the master and media servers.

http://www.symantec.com/docs/HOWTO33201

Assumption is the mother of all mess ups.

If this post answered your'e qustion -  Please mark as a soloution.

SOLUCIÓN
el cuadro de los nike_new

permanant will be done in bp.conf file.OK Thanks

Then what this will do:

bptestbpcd -host fred -connect_options 0 0 2
el cuadro de los Will Restore

-connect_options 0|1|2 0|1|2|3 0|1|2|3

The first setting indicates the type of port to use to connect to bpcd on the

client:

0 = Use a reserved port number.

The second setting indicates the bpcd call-back method to use to connect to

the client:

0 = Use the traditional call-back method

The third setting indicates the connection method to use to connect the client:

2 = Connect to a daemon on the server by using the traditional port number

of the daemon only.

The third setting only affects connections to NetBackup 7.0 and earlier clients and servers. For connections to NetBackup 7.0.1 and later, the veritas_pbx port is used

Will Restore -- where there is a Will there is a way

el cuadro de los CRZ

Let's save everybody a whole lotta trouble:

bptestbpcd
 http://symantec.com/docs/HOWTO43696

I'm begging you guys - if a question from this user starts with a cut and paste from the Commands Guide, don't engage.  ESPECIALLY if all you're gonna do is cut and paste FROM THE EXACT SAME SECTION OF THE COMMANDS GUIDE.  It will do about as much good as me hyperlinking to the very same section of the Commands Guide in SymWISE (which I just did, because I am a fool).  What this mean?  What this do?  How I get job involving NetBackup?  This my office?  Why I can't delete threads?  Consecutive questions?  MAN I need to get some more sleep - this week has been tough.


bit.ly/770LBN | APPLBN | 761LBN