Ayuda de vídeo de Screencast

Confused about creating a job to duplicate from Disk->Tape

Created: 12 Abril 2013 • Updated: 07 Julio 2013 | 5 comments
Se ha solucionado este problema. Vea la solución.

Backup Exec 2010 R3
Windows Server 2008 R2

I just setup a job which I will run manually once a month to backup data to a B2D folder on our network.

I need a job to run immediately after that job finishes which will duplicate the B2D media to a tape in the SDLT tape drive physically connected to this media server, so the tape can go offsite.

However, when I attempt to create this job by clicking "New job to duplicate backup sets", and choose "Duplicate backup sets following a job", I am not permitted to select the new Monthly job I created as a Source Job.

What am I doing wrong?

Operating Systems:

Comentarios ComentariosIr al último comentario

el cuadro de los lmosla

Hi Kriebelgas,  To do this you would create a policy with a template that schedules the b2d job and has a second template that schedules a duplicate to tape job.

Take a look at the following discussion  https://www-secure.symantec.com/connect/articles/techtip-automating-backup-exec-disk-disk-tape-operations

SOLUCIÓN
el cuadro de los Kiran Bandi

Duplication can be setup in BE either for already backuedup data or for a scheduled backup.

What you have done is, you have created a backup job for running it manually i.e "Duplicate data immediately after scheduled backup" option ruled out.

If you do not want to schedule your monthly backup job, AFAIK you can only do the duplication manually through "New job to duplicate backup sets"--> "Duplicate existing backup sets"

Thanks!

el cuadro de los kriebelgas

Thank you for your replies.  I used the instructions in lmosla's response to setup the policies/templates which I believe will work.

el cuadro de los lmosla

Did setting up the policies help with this issue?  Here is another link I forgot to attach.http://www.symantec.com/business/support/index?page=content&id=HOWTO22927

el cuadro de los kriebelgas

Yes, I believe that answers my question.  I won't know for sure until I can test the job for the first time at the end of the month but I'm fairly certain it was what I needed.  Thanks.