Ayuda de vídeo de Screencast

LUA source server IP range

Created: 29 Enero 2013 • Updated: 30 Enero 2013 | 10 comments
el cuadro de los cetnamys19
Se ha solucionado este problema. Vea la solución.

Can anyone tell me if there is a list of IPs or IP range for liveupdate.symantecliveupdate.com. I need to know what will be the IP range used by liveupdate.syamantecliveupdate.com . Only IP can be allow to the internet using the firewall on our infra.

Regards,

N

Comentarios ComentariosIr al último comentario

el cuadro de los Ashish-Sharma

RLs

hosts/0/url=http://liveupdate.symantecliveupdate.com:80
hosts/1/url=http://liveupdate.symantec.com:80
hosts/2/url=ftp://update.symantec.com/opt/content/onramp

http://liveupdate.symantecliveupdate.com

http://liveupdate.symantec.com

ftp://update.symantec.com/opt/content/onramp

 check this link

http://www.symantec.com/docs/TECH139451

Check this thread

http://www.symantec.com/connect/forums/what-are-liveupdate-site-symantec

https://www-secure.symantec.com/connect/forums/url...

Thanks In Advance

Ashish Sharma

el cuadro de los cetnamys19

Thanks Ashish,

Thanks for the url, but i dont need that. IP range or IP list is required for our firewall to allow the LUA server to connect to liveupdate.symantecliveupdate.com

el cuadro de los Ashish-Sharma

Note: Symantec does not supply IP addresses for Symantec LiveUpdate servers. The server addresses are not static and, consequently, routing directly to an IP address may cause LiveUpdate to fail.

Reference

How to determine whether your firewall is blocking LiveUpdate
Article:TECH139451  |  Created: 2010-09-09  |  Updated: 2011-08-26  |  Article URL http://www.symantec.com/docs/TECH139451
 

Thanks In Advance

Ashish Sharma

SOLUCIÓN
el cuadro de los cetnamys19

Hi Ashish,

Thanks for your reply, I'll take note of this an answer.

Regards,

N

el cuadro de los pete_4u2002

check this link to answer your question
http://www.symantec.com/docs/TECH97397
Symantec makes LiveUpdate content available on the Internet through a partnership with the Akamai server network. Akamai is a network of tens of thousands of servers scattered worldwide for more efficient distribution of content. Symantec recommends specifying Symantec LiveUpdate servers via DNS name (fully qualified domain name), not via one or more static IP addresses. Use of static IP addresses to access Symantec LiveUpdate content is not supported or recommended

el cuadro de los Ajit Jha

LUA source server IP address are sunject to change at any point of time, its Dynamic. That is what i know.

Regard's

Ajit Jha

Technical Consultant

ASC & STS

el cuadro de los Mugged

Hi, 

There is no list  of IPs or IP range for liveupdate.symantecliveupdate.com. That can be given / provided publically for liveupdate.syamantecliveupdate.com . Only FQDN has to be allowed on any firewall.

Below are the URL's for the same.  

http://liveupdate.symantecliveupdate.com

http://liveupdate.symantec.com

ftp://update.symantec.com/opt/content/onramp

Also note: Use of static IP addresses to access Symantec LiveUpdate content is not supported or recommended. 

Cheers,
Mugged.

el cuadro de los Ambesh_444

Hello,

Agreed with above comments, 

please let me know if you recieved your answer

Thank& Regards,

Ambesh

"Your satisfaction is very important to us. If you find above information helpful or it has resolved your issue. Please don't forget to mark the thread as solved."

el cuadro de los Ashish-Sharma

HI,

If you received your answer please don't forgot mark as solution

Thanks In Advance

Ashish Sharma