Ayuda de vídeo de Screencast

re directing a failed job to a new device

Created: 06 Nov 2012 • Updated: 04 DEC 2012 | 1 comentario
Se ha solucionado este problema. Vea la solución.

Just installed another tape drive and want to retry the failed job to the new drive

Comentarios 1 CommentIr al último comentario

el cuadro de los Backup_Exec

Hi

If you have just installed new tape drive then please ensure following things are done

1 Backup Exec is fully patched up on first place best to do that and check that is using live update

2 The connected tape drive must be using symantec drivers if they are not please install them using the following link below

http://www.symantec.com/docs/TECH17931

3 If this is library please ensure medium changer is using unknown driver for Microsoft

http://www.symantec.com/docs/TECH124860

4 Once done in backup job please edit the job to use the tape drive connected to server and run the job

Hope that helps

Thanks

Sameer

Don't forget to give a "Thumbs Up" or Mark as "Solution" if someones advice has helped you.

SOLUCIÓN