Ayuda de vídeo de Screencast

scanning

Created: 16 Agosto 2012 • Updated: 17 Sept 2012 | 12 comments
Se ha solucionado este problema. Vea la solución.

is it possible that scanning will be affect on system speed?

Comentarios ComentariosIr al último comentario

el cuadro de los Swapnil khare

Make sure Policy below is not implemented however Regular scan should be scheduled , ie weekly Scan in the Entire network.

===============================================

    How to turn off Active Scan when new definitions arrive?

Solution:    -Open the Symantec Endpoint Manager
-Click on the (policies) tab on the far left side

-Highlight (Antivirus and Antispyware) under the (View Policies) column

-Highlight the policy in question under the (Antivirus and Antispyware Policies) window. If you have not created a new policy, select the existing policy.

-Within the middle column under (Tasks) select (Edit the Policy)

-A new window will open.

-From the new window, there will be a menu on the left side, select (Administrator-defined Scans)

-From the (Administrator-defined Scans) window on the right side select the (Advanced) tab

-Unselect (Run an Active Scan when new definitions arrive)

-Click OK

-Either update the policy from the manager/client, or wait for the next update cycle

 The DefWatch QuickScan has been renamed to an Active Scan in SEP 11

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

el cuadro de los Swapnil khare

If above policy is implemented SEP will scan as soon as new defination are pushed or pulled by the Client .

Might make little difference during normal business hours.

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

el cuadro de los Brɨan

Depends on what version you're on and the specs of your machine. 11.x you might see a performance hit. 12.1 has a much better scan engine and at least for me performance has been great.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

el cuadro de los Swapnil khare

If your SEPM is at 12.1 then disabling active scan will be done through steps below

Open  the SEPM console

Hi,

1) Open  the SEPM console using the credentials

2) click on the Policy tab

3) Click on the Virus and Spyware Protection policy that has been assigned to the group on which you see the active scans are running.

4) Click on the Administartor Defined Scans

5) Click on the Advanced Tab

6) Uncheck the Option of "Run an active scan when new definition arrives" and save the policy.

Hope above all Helps!!!

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

el cuadro de los Swapnil khare

Robin any luck did any of above helped ?

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

el cuadro de los NRaj

Check this.

  • Ensure Scan Tuning options are set for “Best Application Performance”:

http://service1.symantec.com/support/ent-security.nsf/docid/2008082509323748

  • Consider using multithreading during scheduled scans:

http://service1.symantec.com/support/ent-security.nsf/docid/2005062813030748

  • Consider utilizing the resumable scan feature:

http://service1.symantec.com/support/ent-security.nsf/docid/2005062806252148

Hope this helps.

el cuadro de los Jackie007

Try setting the scheduled scan for a different time during the day.  If the machines are never shut off, schedule the scan for in the evening or early morning.  If the machines are shut off at night and on weekends you could try setting the scan time for when the least amount of people would notice it, like when most people are on lunch. 

Or

  1. Open the SEP window
  2. Go to Scan for threats tab
  3. Edit  your scheduled scan
  4. Go to advanced scan options
  5. Go to tuning options
  6. In scan tuning options,either choose Best Application Performance or Balanced Performance.Test each configuration and choose what suits you best.
  7. You could also consider scanning up to a maximum of 3 compression levels.
Archivo adjuntoTamaño
screenshot 1.pdf 207.36 el LAN switch
screenshot 2.pdf 199.75 el LAN switch

Thanks....

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you

SOLUCIÓN
el cuadro de los Jackie007

hi Robin,

have you receive solution ?

Thanks....

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you

el cuadro de los rs_cert

I will check and update after any solution will work.

el cuadro de los Swapnil khare

Any luck with above suggestions ?

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

el cuadro de los rs_cert

Hi- Till i am waiting for next scanning time after that i will come to know it work or not.

Thanks for reply...

el cuadro de los John Santana

so how's it going Robin ?

Kind regards,

John Santana
IT Professional

--------------------------------------------------

Please be nice to me as I'm newbie in this forum.