Ayuda de vídeo de Screencast

SEPM re-installation on Same Hardware

Created: 21 Enero 2013 • Updated: 23 Enero 2013 | 16 comments
el cuadro de los SymClient
Se ha solucionado este problema. Vea la solución.

Hello All,

I need best practice for  SEPM 12.1 RU2 re-installation on same hardware,hostname and ip address.

So that existings client should having re-communication issue.

Regards,

Ajeet

Comentarios ComentariosIr al último comentario

el cuadro de los Ashish-Sharma

hi,

you can follow  Best Disater recovery process

Symantec Endpoint Protection 12.1: Best Practices for Disaster Recovery with the Symantec Endpoint Protection Manager
http://www.symantec.com/business/support/index?page=content&id=TECH160736

Thanks In Advance

Ashish Sharma

SOLUCIÓN
el cuadro de los SymClient

Thanks Ashish,

As we are not going to restore the backup from existing av server.

I need information about client re-communication. is same hostname and ip address is enough to re-communicate to new server?

regards,

Ajeet

el cuadro de los Ashish-Sharma

Yes,

if you are follow this artical all client will be communcate recommunicate your sepm server.

Thanks In Advance

Ashish Sharma

el cuadro de los SymClient

Ok.

I will follow same article and update here....

el cuadro de los SymClient

As i will be not using exsiting backup. do i need to use recovery file at the time of SEPM installation.

el cuadro de los Ashish-Sharma

hi,

Are you installing fresh SEPM ?

If yes please check this thread

https://www-secure.symantec.com/connect/forums/cle...

Thanks In Advance

Ashish Sharma

el cuadro de los pete_4u2002

you can use the same name and IP  and without backup you should be using encryption password ( same) and domain ID while following the DR steps.

el cuadro de los SebastianZ

Just follow the disaster recovery procedures provided above and youi should be fine - you can import the recovery file so that the communications setting from the old sepm are preserved and it will allow clients to reconnect.

el cuadro de los Mithun Sanghavi

Hello,

For the best practice for SEPM 12.1 RU2 re-installation on same hardware, hostname and ip address, check these Articles for SEP 12.1 RU2

Symantec Endpoint Protection 12.1: Best Practices for Disaster Recovery with the Symantec Endpoint Protection Manager

http://www.symantec.com/docs/TECH160736

How to move Symantec Endpoint Protection Manager 12.1 from one machine to another

http://www.symantec.com/docs/TECH171767

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

http://www.symantec.com/business/support/index?page=content&id=TECH163700

Hope that helps!!

Mithun Sanghavi
Associate Security Architect

MIM | MCSA | MCTS | STS | SSE | SSE+ | ITIL v3

Don't forget to mark your thread as 'SOLVED' with the answer that best helped you.

el cuadro de los Ashish-Sharma

HI,

If you received solution please don't forgot mark as solution .which comments best help you.

Thanks In Advance

Ashish Sharma

el cuadro de los abhishek8866

please follow just the disaster recovery procedure and that is it what you rquire.

http://www.symantec.com/docs/TECH160736

el cuadro de los Ambesh_444

Thank you for marking thread as a solved..

Thank& Regards,

Ambesh

"Your satisfaction is very important to us. If you find above information helpful or it has resolved your issue. Please don't forget to mark the thread as solved."