Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

12.1 Ru1 mp1 client install on Domain controllers

Created: 27 Sep 2013 • Updated: 27 Sep 2013 | 4 comments
This issue has been solved. See solution.

Need help on installing SEP 12.1 Ru1 mp1 Domain controllers. 

 

Any suggestions apart from http://www.symantec.com/business/support/index?page=content&id=TECH92440 ???

Comments 4 CommentsJump to latest comment

.Brian's picture

What components do you plan to install?

The latest version is 12.1 RU3. Any reason you can't install the latest?

During the install, SEP will detect and automatically add the necessary exclusions for the DCs. Good reference here"

About the files and folders that Symantec Endpoint Protection excludes from virus and spyware scans

Article:HOWTO80947  |  Created: 2012-10-24  |  Updated: 2013-08-20  |  Article URL http://www.symantec.com/docs/HOWTO80947

 

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

.Brian's picture

I would make sure you thoroughly test this before deploying into production.

You can check the release/fix notes to see what bugs were in 12.1 RU1 MP1 and how you might be affected:

http://www.symantec.com/business/support/index?pag...

I strongly suggest going to RU3 if you can.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

Rafeeq's picture

That  covers Everything... However I would put all the firewall rules for DCs in a test mode before moving them to production.

SOLUTION