Deployment Solution

 View Only
Expand all | Collapse all

6.9 sp6 rdeploy: os reported fatal exception

  • 1.  6.9 sp6 rdeploy: os reported fatal exception

    Posted Dec 24, 2014 07:00 AM

    Hi,

    I would appreciate some help with this troublesome problem. I have two different machines that I pull images from.  One is an amd and one is intel based. 

    I sysprep as always and then start pulling the image.  Pulling image has never failed.  The image file is split up into 2.0 gig files and totals 24 gigs. Now here is the problem.  When ever I send out the images--they fail after about 10-15 mins with this error "rdeploy: operating system reported fatal exception".  But there is another twist.  I sent the image to 4 computers and two failed with the error message above and two continued on with no problems.

    What I have tried that has not worked.

    1. I did a check disk on both machines and pulled the images again--same failure.

    2. I thought it was the network topology causing problems.  I setup a unmanaged switch and only hooked up altiris server and 4 clients and the error message above happened along with the failures.

    3. I used a spare server and built a 2nd altiris server and tried pulling the images with new altiris server and same result.

    4. I took an image I had archived from 2012 and pushed it to the clients and there were no failures.

    5. Any new image created on the two computers I use for building images have high rate of failures with the error message above.

    6. i tried using winpe 2.1 with 6.9 sp5 and it failed sending the recently created images.

    7. i tried using winpe 4.0 with 6.9 sp6 and it failed sending the recently created images.

    8. I took a spare amd system and syspreped it and pulled the image and when I sent it out to the clients, the same error occurred.

     

    Do image machines (the computer that you use to build your image) regularly need wiped and rebuilt and is this my problem?  

     

    Any help would be greatly appreciated. I have been imaging for about 10 years and have never seen this before.

     

     

     

     

     



  • 2.  RE: 6.9 sp6 rdeploy: os reported fatal exception

    Posted Dec 29, 2014 04:06 AM

    Maybe your DHCP leasetime too short?