Video Screencast Help

about lan-enforcer communications methods and port with SEPM

Created: 10 Nov 2009 • Updated: 21 May 2010 | 2 comments
This issue has been solved. See solution.

Today I am busy with configuring the Lan-Enforcer.

Communication methods and port i used are as below,

http 801414

However, it is impossible for me to set 801414. The range is between 1 and 65535.

could some one tell me which number we use?

Discussion Filed Under:

Comments 2 CommentsJump to latest comment

Vikram Kumar-SAV to SEP's picture

If your SEPM is MR3 or Newer it will by default use port 8014 port 80 was default port before MR3.
Port 801414 is used nowhere and it is not any valid port number as well.

80, 8014 TCP SEP Clients svchost.exe (IIS) Communication between the SEPM manager and SEP clients and Enforcers. (8014 in MR3 and later builds, 80 in older).

39999 UDP Enforcer Communication between the SEP Clients and the Enforcer. This is used to authenticate Clients by the Enforcer.

Vikram Kumar

Symantec Consultant

The most helpful part of entire Symantec connect is the Search use it.