Video Screencast Help

Adding disk to Pure Disk pool

Created: 06 Dec 2012 • Updated: 26 Dec 2012 | 4 comments
This issue has been solved. See solution.

I have 7.5 netbackup with disk dep and accelerator set up at the client site. I am runing out of disk space for my small disk (E:test\dedup) for D2D  and I just add two additional 300 GB dirve label as F and G. I would like to expand my current E:Test\dedup . I ma very new to this field and If somebody could help me step by step to complete this task.

 

 

Thanks.

Farshid

Comments 4 CommentsJump to latest comment

Nagalla's picture

hi read the command of  Marianee in below discussion, hope this helps.. 

https://www-secure.symantec.com/connect/forums/net...

 

and also  pure disk best practice... 

 

http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&s...

 

hope this helps.. 

Marianne's picture

Initial planning is key to setting up dedupe since only one disk/volume is allowed....

If you are using an array where lun size can be increased, you can then use disk manager tools or OS to dynamically resize the volume.

The steps are described in in the Dedupe Guide under this topic: Resizing the deduplication storage partition

Hope this helps!

Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows
Handy NBU Links

SOLUTION
Tomer Gurantz's picture

If one of those solved your problem, you can mark that as a solution, please.

Senior Principal Technical Education Consultant with Symantec Corporation