I have been working on getting in my environment on all models a Partition installer using WinPE2.1 through a Windows Setup package. The settings of this package are;<o p=""></o>
Auto Discover the nic ( 1200 drivers)<o p=""></o>
DHCP<o p=""></o>
Use TCP/IP to connect to the DS<o p=""></o>
Automation Agent Location:Remote<o p=""></o>
locked keyboard: check box unchecked ( until I can get this 100% for production)<o p=""></o>
Domain logon & the proper credentials <o p=""></o>
Manually create drive mappings & LMHOST files<o p=""></o>
on the optional components<o p=""></o>
WinPE-Scripting-Package & WinPE-WMI-Package<o p=""></o>
no firewall and compress the WIM file<o p=""></o>
140MB in size as well when creating the partition installer<o p=""></o>
<o p=""> </o>
Now for the fun part, I run this package on anything from gx110 to a dell gx755 and every time they boot I get a BWINST.EXE is not a valid win32 application and it just stops there I looked into the log files on the PE install and all i get is the following.<o p=""></o>
Info No unattend file was found; WPEINIT is using default settings to initialize WinPE<o p=""></o>
Info ==== Initializing Display Settings ====<o p=""></o>
Info No display settings specified<o p=""></o>
Info STATUS: SUCCESS (0x00000001)<o p=""></o>
Info ==== Initializing Computer Name ====<o p=""></o>
Info Generating a random computer name<o p=""></o>
Info STATUS: SUCCESS (0x00000000)<o p=""></o>
Info ==== Initializing Virtual Memory Paging File ====<o p=""></o>
Info No WinPE page file setting specified<o p=""></o>
Info STATUS: SUCCESS (0x00000001)<o p=""></o>
Info ==== Initializing Optional Components ====<o p=""></o>
Info WinPE optional component 'Microsoft-WinPE-WSH' is present<o p=""></o>
Info WinPE optional component 'Microsoft-WinPE-WMI' is present<o p=""></o>
Info STATUS: SUCCESS (0x00000000)<o p=""></o>
Info ==== Initializing Network Access and Applying Configuration ====<o p=""></o>
Info No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.<o p=""></o>
Info Service dhcp stop: 0x00000000<o p=""></o>
Info Service lmhosts stop: 0x00000000<o p=""></o>
Info Service bfe stop: 0x00000000<o p=""></o>
Info Service ikeext stop: 0x00000000<o p=""></o>
Info Service mpssvc stop: 0x00000000<o p=""></o>
Info Spent 491ms initializing security templates; status 0x00000000<o p=""></o>
Info Install MS_MSCLIENT: 0x0004a020<o p=""></o>
Info Install MS_NETBIOS: 0x0004a020<o p=""></o>
Info Install MS_SMB: 0x0004a020<o p=""></o>
Info Install MS_TCPIP6: 0x0004a020<o p=""></o>
Info Install MS_TCPIP: 0x0004a020<o p=""></o>
Info Spent 12488ms installing network components<o p=""></o>
Info iSCSI: iBFT ACPI Table is not available on this system<o p=""></o>
Info Installing device pci\ven_10b7&dev_9200 X:\windows\INF\oem32.inf failed with status 0x800705b3<o p=""></o>
Info Spent 6379ms installing network drivers<o p=""></o>
Info STATUS: FAILURE (0x800705b3)<o p=""></o>
Info ==== Applying Firewall Settings ====<o p=""></o>
Info STATUS: SUCCESS (0x00000001)<o p=""></o>
Info ==== Executing Synchronous User-Provided Commands ====<o p=""></o>
Info STATUS: SUCCESS (0x00000001)<o p=""></o>
Info ==== Executing Asynchronous User-Provided Commands ====<o p=""></o>
Info STATUS: SUCCESS (0x00000001)<o p=""></o>
Info ==== Applying Shutdown Settings ====<o p=""></o>
Info No shutdown setting was specified<o p=""></o>
Info STATUS: SUCCESS (0x00000001)<o p=""></o>
Warning Applying WinPE unattend settings failed with status 0x800705b3; ignoring shutdown settings<o p=""></o>
<o p=""> </o>
looked up the 0x800705b3 in the error codes and it says <o p=""></o>
-2147023437 0x800705B3 This operation requires an interactive window station.<o p=""></o>
<o p=""> </o>
not sure what I am doing wrong here but any help/ advice would be appreciated. <o p=""></o>