Video Screencast Help

Autoclean Frequency Backup Exec 2010 R3

Created: 24 Oct 2012 | 9 comments

Can anyone tell me what conditions will cause Backup Exec 2010 R3 to kick off a cleaning job? For some reason our cleaning tape was used 22 times in the last month, which seems way too often to me. I can't seem to figure out if it is an Inventory Job that invokes a cleaning, or if there is a setting somewhere to tell Backup Exec how often to clean. Any help would be greatly appreciated!

Comments 9 CommentsJump to latest comment

Josh Erquiaga's picture

I don't see any scheduled cleaning jobs, unless that is an option that can be set within another job.

AmolB's picture

Cleaning job is an independent job and it will appear in the job monitor.

Larry Fine's picture

You probably have a dirty or failing tape drive.  When the tape drive issues a TapeAlert indicating that it needs cleaning, BE will clean the drive.  Check your BE alert history.  Check your soft/hard read/write errors on the tape drive.  Your next step is probably to work with your hardware vendor or use the vendor diagnostics.

If you find this is a solution for the thread, please mark it as such.

Josh Erquiaga's picture

I looked through the alert history and couldn't find any tape alerts. On the drive statistics it lists 42 soft read errors and 62 soft write errors (that's apparently total for the life of the drive). I'm not sure how to interpret those. Is that a lot in the scheme of things for a tape drive? The drive has only been in use about 7 months.

Larry Fine's picture

No, those counts are not what I would consider as excessive.  The definitive authority is the manufacturer.

Others have posted here with counts in the thousands or ten-thousands.  That I would assume is bad.

If you find this is a solution for the thread, please mark it as such.

Lesta G's picture

Sounds like you have a tape library.

Some tape libraries can be configured indepenent of backup exec to clean on an error

That is how our IBM tape libraries are configured

Are you using the same brand tape as your tape library? I have seen HP tapes (for example) cause significant cleaning of an IBM Drive

Regards
Lesta
_____________________________________________________
If this response answers your query, please mark it as a solution

Larry Fine's picture

Where is that count of 22 coming from?

If it is from BE, I would expect cleaning jobs or TapeAlerts or something to match up with that count.

I assume you have a tape library, have you run 22 inventory jobs of the library this month?  If you haven't marked the slot that holds the cleaning media as a "cleaning slot" (which exempts that slot from the inventory job), running an inventory job will indirectly clean your drive.

If you find this is a solution for the thread, please mark it as such.