Video Screencast Help

Ayuda Urgente sobre agentes de Symantec

Created: 15 Oct 2012 | 4 comments

Hola a todos,

soy nuevo en symantec backup exec 2010 y necesito saber como instalar los agentes en maquinas linux, agentes para exchange 2003, Lotus Notes, entre otros.

la guia del administrador no me ayuda mucho aun no tengo exito en lo que necesito, si alguien pudiera ayudarme le estaria eternamente agradecido.

Gracias de antemano por la buena voluntad.

Comments 4 CommentsJump to latest comment

Backup_Exec's picture

Hi

There is agent like exchange or domino so on that server you need to install it only remote agent for backup exec. You only install license for exchange or domino on Media server that is it

Please check below link to install remote agent

 http://www.symantec.com/docs/TECH30491

 

For linux agent install please check below link

 http://www.symantec.com/docs/TECH46461

 

Thanks

 

Sameer

Don't forget to give a "Thumbs Up" or Mark as "Solution" if someones advice has helped you.

pkh's picture

1) Go to Tools --> Install Options and Licence Keys ... to install your licences on the media server. This will activate the various capabilities to backup Exchange, Lotus Notes, etc.

2) For Windows Servers, you need to go to Tools ---> Install Agents... to push out the remote agent to the remote Windows machine.

3) For Linux Servers, check the HCL below to see whether the variant is supported.

BE 2010|2010 R2|2010 R3 Hardware (HCL)

If it is supported, then install the RALUS using the procedure in this document

http://www.symantec.com/docs/TECH168901

After installing the RALUS, patch it using the procedure in my blog below

https://www-secure.symantec.com/connect/blogs/how-...

There is no separate agents for Exchange, etc.  There is only one agent and whether the agent is able to backup Exchange, etc., depends on the licences installed on the media server.

gnolazcor's picture

Buenas tardes,

les estoy muy agradecido, hasta el momento va marchando todo a la perfeccion en la instalacion solo me falta probar el agente linux y de ahi a enviar los respaldo.

pero tengo una duda, cuando hago el respaldo de una maquian virtual en VMware solo respalda el archivo vmdk y no el vmx y cuando restauro la informacion y la importo al VMware 4.1 sale un error que dice:

Module DevicePowerOn power on failed.

Unable to create virtual SCSI device for scsi0:1, '/vmfs/volumenes/4e9cb898-92da156c-3a71......./name.vmkdk

failed to open disk scsi0:1: Unsupported or invalid disk type 7. Make sure that the disk has been imported

probe levantandolo en un VMware Workstation y ahi hay ciertas dificultades pero al final levanta, como puedo solucionar este problema.

y sobre el exchange he visto en un video que al respaldar la BD puede ver los buzones de los usuarios lo cual yo no puedo visualizar y tampoco veo la opcion Archive Tasks en el panel del Job Setup.

Backup_Exec's picture

Hi

 

For your vmware related query you can open up a new thread as the issue with installation is solved.

 

Thanks

Sameer

Don't forget to give a "Thumbs Up" or Mark as "Solution" if someones advice has helped you.