Backup exec 10d and LTO 4
Updated: 21 May 2010 | 4 comments
I'm trying to get my new tape library msl 4048 loaded with LTO 4 tapes to read in Backup exec 10d. Is this possible? I can however see LTO 3 tapes fine. I did some searching on the site and browsed the HCL and didn't specificy see my MSL 4048.
discussion Filed Under:
Comments
Check the drive model
MSL4048 is supported by BE 10d, but only LTO3 tape drives are supported.
Also you need to make sure
Also you need to make sure you have library expansion license if you have more than 1 drive . But if the Drive or theRl not mentioned in the compatibility list it would be a better option to upgrade to the version which supports it ...
If this response answers your concern, please mark it as a "solution"
Thanks for the info, yes the
Thanks for the info, yes the msl4048 has dual drives, guess I'm buying the expansion license, Thank You for your help.
The expansion licence will
The expansion licence will only allow you to run multiple tape drives. If your drive is not supported, having the licence will not help.
Would you like to reply?
Login or Register to post your comment.