Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

Bare Metal Restore Netbackup 7.5.0.5

Created: 23 Mar 2013 | 4 comments

Hello House.

 

I am implmenting BMR for a netbackup 7.5.0.5 VCS cluster.I have started the BMR daemon and setup the BMR database successfully on the master.

and have even run a test BMR client abckup successfully.

 

I have challange creating the bootservers .My environment has UNIX (SOLARIS AND LINUS),windows VM WARE .

Could someone help with a quick hands on guide for installing/setting/comfiguring the bootservers.

All efforts is very much appreciated

Comments 4 CommentsJump to latest comment

Yasuhisa Ishikawa's picture

BMR boot server software is included in NetBackup server and client. You don't have to install any additional components.To setup BMR boot server, just fire "bmrsetupboot -register".

You need to setup BMR server for each OS. Please check this doc before you start to setup BMR boot server.

Requirements for Bare Metal Restore (BMR) Boot Servers: http://www.symantec.com/docs/TECH87607

Authorized Symantec Consultant(ASC) Data Protection in Tokyo, Japan

Ayes's picture

Thanks a million Ishikawa.

I have upto 20 solaris 10 media serves ,No linux media and windows servers for now backing up the linux windows client through the solaris 10 media servers ,

 

Fromt your suggestion,I need to install a Linux and Windows Media servers seperately and do the setup accordingly.

 

In addition,Do I need any form of reources like specific disk/storage on the servers because I want to select out of the media servers for the BMR boot server.Is ther any other prerequise so that I will get ready before intiating the setup of the BMR boot server son the selected media server may be 2 media servers out of my 20 solaris 10 media servers, 1 linux media servers and windows media servers respet.

 

Thanks for all once more.

Marianne's picture

BMR boot server can be a client as well - see NBU OS Compatibility Guide: http://www.symantec.com/docs/TECH76648

Best to read up on boot server requirements in BMR admin guide:and take it from there....

NetBackup Bare Metal Restore Administrator's Guide http://www.symantec.com/docs/DOC5163

Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows
Handy NBU Links

Yasuhisa Ishikawa's picture

You can configure clients as BMR boot server, so you don't need to install Linux and Windows media servers. Chose some of existing client(or newly installed client), and configure as BMR boot server.

Disk space for Shared Resource Tree(SRT) is required for BMR boot server, but it is not so much. Few giga bytes is enough for SRT in most case. Be sure you need to deply BMR boot server in each subnet if you want network boot.

Oh, I missed. Depending on the OS, some additional OS packages and configuration steps are required. Please check chapter 2 of NetBackup 7.5 BMR Administrator's Guide.

http://www.symantec.com/docs/DOC5163

Authorized Symantec Consultant(ASC) Data Protection in Tokyo, Japan