Video Screencast Help

BSOD of W2k3 R2 x64 -> SYMTDI.SYS

Created: 01 Nov 2012 | 9 comments
martin hess's picture

Hi

I have a Windows Server 2003 R2 x64 file server. When I deploy SEP 12.1.1101.401 (RU1 MP1) to this server and reboot it afterwards,¨the server BSODs with a error in tcpip.sys. After disconnecting all NICs from the network, the server boots up correctly. If SEP is removed, the server works correctly. The whole scenario is reproducable.

An analysis of the minidump shows that the symtdi.sys driver creates a DRIVER_IRQL_NOT_LESS_OR_EQUAL error. I've attached the analysis to this post.

On the same server, Backup Exec 2010 R3 is installed. Removing the NIC drivers and reinstalling them didn't help.

Can anyone out there help me to resolve this issue??

Kind regards from switzerland;
martin

 

Comments 9 CommentsJump to latest comment

Ashish-Sharma's picture

HI,

try this may be help

Blue screen (BugCheck D1) when Symantec Endpoint Protection (SEP) 12.1 is installed on a Windows 2008 64-bit Small Business Server

http://www.symantec.com/business/support/index?page=content&id=TECH191141

Thanks In Advance

Ashish Sharma

 

 

martin hess's picture

No. My Server is running Windows Server 2003, not 2008. So the fix doesn't apply to my system.

Jason1222's picture

There are a few cases of this occuring with the Firewall component of SEP on Windows machines.

Do you know what the NIC model is?

Possibly a newer version of the driver might help. 

If it is a Broadcom or Intl chip, try loading the latest drivers and not ones provided by the MB manufacturer but rather from the chipset manufacturer.

martin hess's picture

its a HP NC373i networks card. I've already removed the nic drivers, rebooted, and reinstalled them again. Doesn't help.

_Brian's picture

What components do you have installed?

Start with only installing the AV component.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

martin hess's picture

only AV is installed.. :-(

Ashish-Sharma's picture

BSOD's  you will need  COMPLETE memory dump and then open a case with support to provide this dump for review. Below is documentation on how to configure this dump.

http://www.symantec.com/docs/TECH104660

Thanks In Advance

Ashish Sharma

 

 

_Brian's picture

Your best bet is a call to support with the full dump available.

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

Simpson Homer's picture

 

Phone numbers to contact Tech Support:-

 

Regional Support Telephone Numbers:
United States: 800-342-0652 (407-357-7600 from outside the United States)
Australia: 1300 365510 (+61 2 8220 7111 from outside Australia)
United Kingdom: +44 (0) 870 606 6000

India: Toll-Free 000 800 4401 456 directly

IDD call: +61 2 8220 7111

 

Additional contact numbers: http://www.symantec.com/business/support/contact_techsupp_static.jsp

 

Customer Care Contact Numbers for Licensing Issues:-

http://www.symantec.com/support/assistance_care.jsp

 

 

How to create a new case in MySupport

http://www.symantec.com/business/support/index?page=content&id=TECH58873