Video Screencast Help

Can Opscenter control access by IP filtering?

Created: 29 Jan 2013 • Updated: 04 Sep 2013 | 2 comments

Hi all,

Can opscenter control access by IP filtering ?? I don't want to explosure the login page to users

If no, any solution to get the same result?

Discussion Filed Under:

Comments 2 CommentsJump to latest comment

Ashish-Sharma's picture


Try to this

click Settings, then go to Configuration and then click on the Agent tab (second from left to right). You will need to select on which host does the Agent run (by default it will be the very same host you installed OpsCenter onto, so just type in the name of your Windows machine there), the family type OS (Windows obviously), the PBX port (1556 by default, this is the Private Branch Exchange port and I don't recommend that you change its number) and finally you'll need to choose the network interface that connects to the master (it's usually the same IP that you accessed OpsCenter from, see point 4 above). Once you've done all this, the new Agent should appear just below the Integrated Agent, so click on it to check the settings again.*NOTE* You don't need this step if you run NetBackup 7.x!


Thanks In Advance

Ashish Sharma

tom_sprouse's picture


I understand your questions, and yes it can be done, but it is not officially supported, as it requires modification to either the web.xml file or server.xml file.

I have provided this information in the past to a customer, as a "Use at your own Risk!" option.

I will need to look this information up tomorrow, and can provide it to you, with the understanding, it is not an offical use of the OpsCenter product.


If you need the information soon, I can tell you that OpsCenter runs on our version of Apache / TomCat and there are many articles out there providing IP ALLOW or DENY


<Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="x.x.x.x"/>

<Valve className="org.apache.catalina.valves.RemoteAddrValve" deny="x.x.x.x"/>

Note: If this post provides you with a solution don't forget to mark the discussion as solved...