Video Screencast Help

client server communicatio

Created: 12 Oct 2013 • Updated: 24 Oct 2013 | 5 comments
This issue has been solved. See solution.

How to check and verify the client and server communication in Altiris?

Comments 5 CommentsJump to latest comment

ᗺrian's picture

See here

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

Sumit G's picture

Check the link

Altiris Agent installed, but there is no communication with the Notification Server
Article:TECH11699  |  Created: 2005-09-09  |  Updated: 2007-11-12  |  Article URL


Sumit G.

andykn101's picture

Open an agent, click Settings then Update Configuration.

if the Last Configuration Date changes then communication is working.

Authorised Symantec Consultant (ASC) with Endpoint Management Limited, an Authorised Symantec Delivery Provider based in the UK.

Connect Etiquette: Please "Mark as Solution" posts that fix your problem.

Ambesh_444's picture


Please check this thread for best and simple answer.


Ports and Protocols for Symantec IT Management Suite 7.1

Article:HOWTO83503  |  Created: 2013-02-07  |  Updated: 2013-03-21  |  Article URL

Summary of Ports Used by Altiris Solutions

Article:HOWTO3401  |  Created: 2006-05-03  |  Updated: 2013-04-30  |  Article URL

 The ports and protocols from 7.0 remain true for 7.1:

Thank& Regards,


"Your satisfaction is very important to us. If you find above information helpful or it has resolved your issue. Please don't forget to mark the thread as solved."