Ghost Solution Suite

Hallo experts!!!

i recently installed my ghost image server envirement and configured the deploy center Virtual boot disk

my image server and dhcp server are on different servers but on the same subnet with no router in the middle

i configured the dhcp server and tried PXE BOOT  -  i got a legitimate address and then i got this error PXE-E55: proxyDHCP service did not reply to request on port 4011

after googling it for a while i dont have a clue about the proper solution and my boss is waiting for answers so any help would be appreciated.

thanks

Just to verify, Option 60 is enabled on the DHCP Server? This can certainly cause this. What I would recommend in your sitaution, though, is to consider a different PXE setup. The following article is a quick-to-configure PXE setup that will likely resolve the issue:

How to use the 3Com Boot Services (and SolarWinds TFTP) with Symantec Ghost Solution Suite 2.5 using WinPE
http://service1.symantec.com/SUPPORT/on-technology.nsf/docid/2009060307534660 

Thank you,

Randy