Data Loss Prevention

 View Only
  • 1.  DLP report

    Posted Jul 04, 2014 07:33 AM
      |   view attached

    Hi All,

    The weekly report is showes about 85 incidents, but in the DLP tool  it showing only 63 incidents only.

    What could be the problem?

     

    please refer the screen short for more details in the attachment.

     

     

     

     

     

     

     

     

     

    Attachment(s)



  • 2.  RE: DLP report

    Posted Jul 04, 2014 07:59 AM

    Hi Mohan,

    In the first report you have summarized the incidents by  weekly, that is showing total 63 incidents

    but your DLP Scheduled weekly report is showing 85 incidents because of your sumarized filter which you have applied here.

    you have summarized by Manager Displayname and Sender, Hence it is showing you the total number of incident counts are 85.



  • 3.  RE: DLP report

    Posted Jul 04, 2014 08:02 AM

    "Your satisfaction is very important to us. If you find above information helpful or it has resolved your issue. Please don't forget to mark the thread as solved."



  • 4.  RE: DLP report

    Posted Jul 04, 2014 09:09 AM

    i have generated report it showing 85 incidents,

    But user has logied in DLP tool and check total incident showing 63 only

    what about remaning incidents?

    but user not closed any of incidents and they filter it correctly, again it showing only 63 incidents only.

     

    please tell me what may be the correct solution for this



  • 5.  RE: DLP report

    Trusted Advisor
    Posted Jul 07, 2014 02:17 AM

    Hi mohan,

     

     Take care that once you use summarization in a report, "total" value in the report is no more number of incident but total number of value of parameter you use for summarization.

     

     regards.



  • 6.  RE: DLP report

    Posted Jul 08, 2014 12:31 AM

    There is only the difference between filter you are going to apply for generating the reports..

    User is applying the summarization filter by Investigation tab only

    but in your sheduled weekly report you have applied the filter summarized by mangerdiplay name and sender

    so it is repeating the same incidents count with managerdisplay name and sender also.

    e.g Manager display name = 22

    and Sender                      = 63

    total                                = 85

    if you want the exact match result then please apply the fileter summarized by investigation then you will get the same result.

    "Your satisfaction is very important to us. If you find above information helpful or it has resolved your issue. Please don't forget to mark the thread as solved."