Video Screencast Help
Symantec Appoints Michael A. Brown CEO. Learn more.

Does anyone know how to configure an active/passive vault environment ?

Created: 07 Jun 2006 • Updated: 23 May 2010 | 5 comments

I once succeeded in such a configuration, it resulted in some services being hosted, I do have screenshots from it, but until now I'm unable to set up such environment.
Can anybody give me some guidelines ?

TIA

Discussion Filed Under:

Comments 5 CommentsJump to latest comment

SymcMarj's picture

Are you using VCS? Is that the scenario you are referring to?


If not, you can go to http://seer.support.veritas.com/docs/282072.htm and open the Introduction and Planning Manual and view the Building Blocks section for information

SymcMarj's picture

DuplicateMessage was edited by: MHA
M A

Ronald Iemenschot's picture

I'm not using VCS, and as far as I know I've followed the building blocks section in the document you mentioned.
When changing the dns alias to point to the standby failover server, updating service locations do not create services in hosted mode.

SymcMarj's picture

Did you get an errors when you ran the USL? If so what are they? And what happens when it is completed?

Ronald Iemenschot's picture

No error at all, no eventlog.
Do you know what to set more than VaultConfiguration in dtrace for monitoring ?