Deployment and Imaging Group

 View Only

  • 1.  DS 7.6 HF7 - Error: Windows failed to start. A recent hardware or software change might be the cause

    Posted Feb 15, 2016 02:55 PM

    I created a windows 7 Pro Image successfully with simple job given below (I am using ITMS 7.6 HF7)

    1. Prepare for Image Capture
    2. Capture Image.

                   

    Now I am trying to deploy Image with this Simple Job

    1. Deploy Image.

    Image deploy task completes successfully and when computer restarts in production I get this error. Screenshot is geven below for review.

    Untitled.jpg

     

    Anyone can suggest what the problem is

     

     

     



  • 2.  RE: DS 7.6 HF7 - Error: Windows failed to start. A recent hardware or software change might be the cause

    Posted Feb 15, 2016 03:27 PM

    Not sure if it will make a difference but our initial deploy jobs look like the following:

     

    Deploy Image

    Run Boot to Production

    Run Apply Systems Configuration

     

    May try modifying your job accordingly and try your image again.

     

    Misty

     

     



  • 3.  RE: DS 7.6 HF7 - Error: Windows failed to start. A recent hardware or software change might be the cause

    Posted Feb 16, 2016 01:59 AM

    Are you using an automation folder?

    Maybe this might help:

    https://support.symantec.com/en_US/article.TECH232932.html

     



  • 4.  RE: DS 7.6 HF7 - Error: Windows failed to start. A recent hardware or software change might be the cause

    Posted Feb 16, 2016 08:01 AM

    Hi Misty,

     

    I have tried but same error.

     

    Hi Mitral, I am not using Automation folder its Initial deployment on bare matel system with successful image deployment error occure on rebot to production.

     

    regards



  • 5.  RE: DS 7.6 HF7 - Error: Windows failed to start. A recent hardware or software change might be the cause

    Posted Feb 16, 2016 12:54 PM

    What kind of machine is this? Does it have UEFI or a standard BIOS? Possible that you need to set legacy BIOS mode in the BIOS settings. Are you getting a brief BSOD (blue screen of death) at any point during boot?

    Just a guess at this point...