E00084D
Updated: 11 Jun 2010 | 2 comments
Getting a hardware error when I try and back up (error Id above). I have images and files of the error, the error report, and a screen dump of the version. What is next in troubleshooting.
I can erase the tapes inventory them but as soon as I try backup I get the error.
Backup Exec 12.0 / ULTRIUM III Tape Library (4 - 8GB) cannot restart the server attached as it is primary file server. I can/will send the images if requested.
JR
discussion Filed Under:
Comments
Hi JR, Is Removable Storage
Hi JR,
Is Removable Storage disabled? If not, I'd suggest starting by stopping the service and disabling it.
Next up would be to try a small backup-to-disk to eliminate possible software issues. if it works, the problem lies with your library. If not, it's the software and we can take it from there.
However, you can also look at making sure you have the latest drivers for your version of BEWS, as well as making sure the software is patched and up-to-date.
What make of library is it? If HP, get hold of HP Library and Tape Tools (HP LTT) which will allow you to run diagnostics against the device, and update the firmware if necessary too.
Post the results here...
Laters!
If you find this is a solution, please mark it as such.
Hi JR, Any news here?
Hi JR,
Any news here?
If you find this is a solution, please mark it as such.
Would you like to reply?
Login or Register to post your comment.