enabling workstations in DISABLED state
Updated: 21 May 2010 | 7 comments
hi all,
how do i enable workstations in DISABLED state automatically from the main server. i have about 100 workstations attached to the DLO server. i need to do this urgently.
thank you.
discussion Filed Under:
Comments
URGENT PLEASE
hi all,
i am currently under pressure to do this, kindly assist.
thank you.
Ayodeji Oni
NetApp/VERITAS/IBM/SCS
Not used it & never have, so excuse me if this isn't
what you need, but you did say you were in a rush!
In the Admin Guide for DLO 6.1:
"...
Enabling or Disabling a Desktop Computer
When a computer is disabled, the Desktop Agent remains on the desktop computer. The Desktop Agent can be used to restore files and view history, but backups are disabled and the user cannot modify Desktop Agent settings.
▼ To enable or disable a desktop computer:
1. On the DLO navigation bar, click Setup.
2. In the selection pane, click Computers.
3. In the results pane, select one or more computers to be enabled or disabled.
4. Right-click the selected computers and click Enable to enable the Desktop Agent to run on the selected computers, or click Disable to prevent the Desktop Agent from running on the selected computers.
..."
Regards Andy
"It's not too late to panic ..."
So, Andy, in other words,
So, Andy, in other words, RTFM or Google it!
LOL. thanks for the assist to AYODEJI.
NBU 7.0.1 on Solaris 10
writing to EMC 4206 VTL
duplicating to LTO2 in SL8500
(Soon to be LTO5)
using ACSLS 7.3.1
;)
...
Regards Andy
"It's not too late to panic ..."
solved it.
thank you all.
Ayodeji Oni
NetApp/VERITAS/IBM/SCS
So...
did I get it right, or was there another resolution? :)
Regards Andy
"It's not too late to panic ..."
solution
i ran this command and all workstation were enabled.
C:\Program Files\Symantec\NetBackup DLO>DLOCommandu -N username -NotifyClients -Logfile c:\log.txt
thank you.
Ayodeji Oni
NetApp/VERITAS/IBM/SCS
Would you like to reply?
Login or Register to post your comment.