Video Screencast Help

Exchange restoreration

Created: 27 Jul 2011 • Updated: 02 Aug 2011 | 5 comments
shard's picture
This issue has been solved. See solution.

Hi

 

I am trying to restore one exchange database to the recovery storage group, I have backup exec 11 D & exchange server 2003, I am getting below mention error when tring to restore.

database size is 136 gb after restoreing approxmattly 130 gb data restore job fails with below error. Please advice................

Completed status: Failed
Final error: 0xe000ff00 - Unable to restore some Microsoft Exchange components because one or more of the databases are currently mounted or because the Recovery Storage Group is not properly configured. Use the Exchange System Manager to check the configuration of the Recovery Storage Group and the mount status of the databases.
Final error category: Resource Errors

For additional information regarding this error refer to link V-79-57344-65280

 

Comments 5 CommentsJump to latest comment

ZeRoC00L's picture

Did you check this Technote:

http://www.symantec.com/business/support/index?page=content&id=TECH37694

 

And maybe another strange question, but you are sure the disk(s) of the exchange server are not full ?

If this response answers your concern, please mark it as a "solution"

shard's picture

Thanks for replying,

my backup is not snapshot backup it is GRT backup, Do you mean that backup exec dose not support recovery group restore at all? or it dosen't support  it, if it is snapshot full as shown in tech note.

ZeRoC00L's picture

Okay, then you should able to restore it.

What you also can try is to modify the following registry key:

 

HKLM\Software\Veritas\BackupExec\Engine\ese

name = "ignore mount state"

value = DWORD(1)

 

http://www.symantec.com/business/support/index?page=content&id=TECH64713&actp=search&viewlocale=en_US&searchid=1311765893571

If this response answers your concern, please mark it as a "solution"

CraigV's picture

Hi,

 

When doing GRT restores, the default location for the temporary location of the FULL Information Store is C:\Temp. So first thing would be to check and see if there is enough free space on your C:\ to host the Information Store.

if not, you can change this to a drive with enough disk space by clicking: Tools --> Options --> Microsoft Exchange.

Thanks!

Alternative ways to access Backup Exec Technical Support:

https://www-secure.symantec.com/connect/blogs/alte...

shard's picture

It has got resolved by installing the SP5 & as you have mentioned, I gave different path instead of C:\Temp

 

Thank you to all of you for helping me to resolve this & sorry that I haven't updated for long time.

SOLUTION