Video Screencast Help
Give us your opinion and win with Symantec! Please help us by taking this survey to tell us about your experience with Symantec Connect, so that we can continue to grow and improve.  Take the survey.

Exhchange 2010

Created: 07 Jul 2011 • Updated: 11 Jul 2011 | 3 comments
This issue has been solved. See solution.

We have 2 exchange 2010 servers. CAS and Mailbox server.

We can successfully backup the Mailstores and mailboxes and emials using GRT.

I have not been successful in restoring an email. Has anyone restored an email.

Looking through the support site you need to set the source as the malbox server and the destination as the CAS server.

I get the following error

8/07/2011 2:58:42 PM - begin Restore
8/07/2011 2:58:43 PM - restoring image nsyex03_1309942890
8/07/2011 2:58:47 PM - Info bpbrm(pid=6020) <<CAS SERVER>> is the host to restore data      
8/07/2011 2:58:48 PM - Info bpbrm(pid=6020) reading file list from client        
8/07/2011 2:58:50 PM - connecting
8/07/2011 2:58:50 PM - Info bpbrm(pid=6020) start nbfsd on client         
8/07/2011 2:58:51 PM - Info bpbrm(pid=6020) start nbgre on client         
8/07/2011 2:58:53 PM - Info tar32(pid=0) Restore started           
8/07/2011 2:58:53 PM - connected; connect time: 00:00:03
8/07/2011 2:58:55 PM - Info tar32(pid=0) done. status 13          
8/07/2011 2:58:55 PM - Info tar32(pid=0) done. status: 13          
8/07/2011 2:58:55 PM - restored image nsyex03_1309942890 - (file read failed(13)); restore time 00:00:12
8/07/2011 2:58:56 PM - end Restore; elapsed time: 00:00:14
MS-Exchange-Server policy restore error(2810)
8/07/2011 2:59:00 PM - Info tar32(pid=0) done. status: 13: file read failed       
8/07/2011 2:59:00 PM - Error bpbrm(pid=6020) client restore EXIT STATUS 13: file read failed    

Comments 3 CommentsJump to latest comment

Riaan.Badenhorst's picture


Please review this note for troubleshooting assistance


Riaan Badenhorst

ITs easy :)

rizwan84tx's picture


You have to update in Master server host properties-->Distributed application restore mapping properties

Application Host = Exchange MailBox Server

Component Host = CAS server name.

Best Regards,


JohnKnittl's picture

Perfect, Thank you the restore worked successfully.