Video Screencast Help

GUP Table

Created: 18 Oct 2013 • Updated: 24 Feb 2014 | 6 comments
This issue has been solved. See solution.

If we put 0.0.0.0 and have and GUP mapping value, will that be same as any machine goes to specified GUP.

Operating Systems:

Comments 6 CommentsJump to latest comment

pete_4u2002's picture

what is the thing you want to achieve?

configuring the Group Update Provider (GUP) in Symantec Endpoint Protection 11.0 RU5 and later

Article:TECH96419  |  Created: 2009-01-28  |  Updated: 2012-04-23  |  Article URL http://www.symantec.com/docs/TECH96419

 

SOLUTION
Adamster's picture

we have a group that has too many subnets...we don't want to type in all subnets...so we are doing this.  We understand the risk, but my question is, will 0.0.0.0 mean any subnet go specified gups?

.Brian's picture

I don't believe it will. Try this tool to help

https://www-secure.symantec.com/connect/downloads/...

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

SOLUTION
Adamster's picture

Brian,

We have a group and two GUPs that will serve that group.  Regardless of any subnets in that group, we want it to go to those two gups?  what is the most efficient way to do this?  Because when we set a static gup, we can only do one at a time.

pete_4u2002's picture

you asking about subnet mask?

there is nothing like 0.0.0.0 mask

.Brian's picture

Do you need more assistance with your problem or were you able to get it resolved?

If you could post an update for followers of this thread that would be most helpful.

Otherwise, if resolved, you can close the thread out by clicking the "Mark as solution" link at the bottom left on the most helpful post. If multiple posts helped to solve your problem, please click the "Request split solution" link at the bottom left, select the most helpful posts and click the "Submit" button. This will benefit admins looking for a resolution to the same problem.

Thanks and take care,
Brian

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.