Hi,
Try to this
To configure application-specific settings
1 In the client, in the sidebar, click Status.
2 Beside Network Threat Protection, click Options > View Applications List.
3 In the View Applications List dialog box, select the application you want to
configure, and then click Configure.
4 In the Configure Application Settings dialog box, in the Trusted IPs for the
application field, type an IP address or an IP range.
5 In the Remote server ports or Local ports group boxes, select a TCP or a UDP
port.
6 To specify the direction of the traffic, click one or both of the following items:
Managing Network Threat Protection
Configuring application-specific settings
■ outbound traffic, click Allowoutgoing connections.
■ To allow inbound traffic, click Allow incoming connections.
7 To apply the rule when the screen saver runs, click Allow while screen saver
is activated.
8 To set up a schedule when the restrictions are or are not in effect, click Enable
scheduling.
9 Select one of the following items:
■ To specify the time when the restrictions are in effect, click During the
period below.
■ To specify the time when the restrictions are not in effect, click Excluding
the period below.
10 Set up the schedule.
11 Click OK.
12 In the View Applications List dialog box, to change the action, right-click the
application, and then click Allow, Ask, or Block.
13 Click OK
Check client Guide Page no 122 -123