Video Screencast Help

how to assingn volume

Created: 15 Apr 2010 • Updated: 12 Nov 2010 | 4 comments
This issue has been solved. See solution.

Hi ,

 How to assign a volume to volume pool through command line?

Comments 4 CommentsJump to latest comment

Christoph Linden's picture

Do you want to put a volume into a volumepool or do you want to assign it?

Putting volumes in a volumepool is different to assigning it. There is no way to assign a tape manually.

But you can put a tape in a volumepool with vmchange.

 

/usr/openv/volmgr/bin/vmchange -p pool_number -m media_id

Again,

this will not assign the medium. It simply put the medium in the pool. This is also only possible if the medium is not assigned.

And do not play arround with assignment. Netbackup will automatically assign medias AND use this for securing the data on tape. So again DO NOT PLAY WITH ASSIGNMENT!


 

SOLUTION
koya's picture

by default all volumes are in Netbackup volume pool right.....?

if u want assign that volumes to another volume pool

just u select that volumes and right click on that volumes..

in that menu select change

mubarack.s's picture

Hi thr was a problem in my GUI so only I asked for the command . The below command helped me to change the volume pool. .  Thanx

 

 Thanks and regards,

Mubarack.S