HOw to create condition2 for Pcs that do not use the regular domain
Created: 07 Feb 2013 | Updated: 07 Feb 2013 | 8 comments
This issue has been solved. See solution.
I am trying to re-create a location condition and do not know how. I am sending a screenshot of the location condition that i need to re-create. I figured out how to create condition1 (Client pc does not connect to the management server).
I cannot figure out how to create the 2nd condition (if client pc does not use the domain names listed below:)
Can someone help me figure this out?
Discussion Filed Under:
Comments 8 Comments • Jump to latest comment
Go to Policies page
Click Policy Components
Select Host Groups
Give it a name and click Add
Edit this part accordingly
Click OK, OK
Now go to Clients page
Under that location, add your 2nd condition and in the drop down select DNS Server Address
Click Add
For the Type, select Host Group and select the one you just created
Click OK, OK
SEP Knowledge Base
Endpoint SWAT
thank you for your response - the 2nd condition looks different than the one i started with - is it doing the same thing?
Let me take a closer look at this. I didn't read closely enough.
I assume you are on 12.1 now correct? Was this in place before 12.1 (in 11.x?)
If you select Condition 2 and hit Edit, what comes up? A box with "Specify Location Criteria" should pop up
If so, what is the "Type:" field set to?
SEP Knowledge Base
Endpoint SWAT
Nevermind, I found it.
For the "Type" field select DHCP Connection DNS Suffix
Click Add
Under DHCP Connection DNS Suffix, type in "intra.dhs.ca.gov"
Click Ok and OK again
Now it will show correctly like your screenshot
SEP Knowledge Base
Endpoint SWAT
THANKS - PERFECT MATCH!! now hopefully it will work. I am trying to create a firewall policy that will allow communication with two Novell servers on our floor that use the IPX protocol. Very Frustrating!
Try the steps here:
Inbound Novell IPX frames ETHERNET [type=0xE0E0] are filtered by SEP Firewall policy
SEP Knowledge Base
Endpoint SWAT
just wanted to let you know that your instructions WORKED PERFECLTY!!! my folks can now reach the novell servers. THANK YOU SOOOOOOOOOOOOOOOOOOOOOO MUCH!!!!!
Glad to help, can you mark it as solved. Thanks!
SEP Knowledge Base
Endpoint SWAT
Would you like to reply?
Login or Register to post your comment.