Video Screencast Help

How to install device as non-plug and play?

Created: 26 Jan 2005 • Updated: 21 May 2010 | 4 comments

How do I install my tape devices as non plug and play devices, I had to do this in my 9.1 environment on my SAN.

Comments 4 CommentsJump to latest comment

John Chisari's picture

No need to anymore - you can install Plug and Play driver when the tape devices are on a SAN.
By default BE 10 will always install the Plug and Play drivers if they are available for the tape drive.

Ameet Thakkar's picture

As an additional information, you may refer to the technote link given below and install Plug-Play device drives. This technote is related to Backup Exec v9.1 but its applicable to 10.0 as well

Title:- How to install VERITAS Plug-and-Play Tape Device Drivers for Backup Exec 9.1 for Windows Servers

Eric Sabo 2's picture

Support last year said that I had to install my drivers as non-plug and play because they were in a SAN environment. Has this changed in the new version?

Zerene Sangma's picture

Yes, now you can install Plug and play drivers in SAN environment. Do apply the following hotfix: