Video Screencast Help
Give us your opinion and win with Symantec! Please help us by taking this survey to tell us about your experience with Symantec Connect, so that we can continue to grow and improve.  Take the survey.

If LLT could be configured over UDP with NAT?

Created: 14 Aug 2012 • Updated: 16 Aug 2012 | 2 comments
lmiao's picture
This issue has been solved. See solution.

Customer is ready to configure LLT over WANs, he asks if NAT configuration is supported on LLT subnets?

Thanks!

Comments 2 CommentsJump to latest comment

mikebounds's picture

I have a customer who has done this and it worked:  In the "link" lines in llttab you put the IP address of server and in the "set-addr", the NAT IP address - example:

set-node /etc/VRTSvcs/conf/sysname
set-cluster 1
link hb-normal /dev/udp - udp 50100 - 10.5.0.1 -
link hb1-nat /dev/udp - udp 50101 - 10.5.1.1 -
 
set-addr 1  hb-normal 10.6.0.1
set-addr 1  hb-nat 173.194.34.98
 
#disable LLT broadcasts
set-bcasthb 0
set-arp 0
Mike


UK Symantec Consultant in VCS, GCO, SF, VVR, VxAT on Solaris, AIX, HP-ux, Linux & Windows

If this post has answered your question then please click on "Mark as solution" link below

SOLUTION
lmiao's picture

Got it... So many appreciate!