Install NetBackup Enterprise Server 6.5 on Window server 2008 fail
Updated: 04 Jun 2010 | 7 comments
Hi . ..
When I installed netbackup 6.5 on window server 2008 . I encountered the following error: NetBackup Enterprise Media Manager failed to start in log install .
Could anybody help me please ?
discussion Filed Under:
Comments
More info
are you trying to install it as a master a media or a client
is it 32 or 64
Note that 2008 did not become supported until 6.5.2. so you need to down load the correct nb files
I don't have to know how to spell....I work on Unix.
NetBackup 7.0.1 - AIX & Windows
I installed complete :D
I installed complete :D .Hostname is fail .
Thank support !
Good luck !
Dear Sir I have the same
Dear Sir
I have the same error on my windows 2008 sp2 server . So , Can you tell me "Hostname is fail " ????
The same original post was duplicated here:
https://www-secure.symantec.com/connect/forums/install-netbackup-enterprise-server-65-window-server-2008-fail-0
looks like there was a possible hostname resolution issue.
Regards Andy
"It's not too late to panic ..."
Symantec currently doesnt
Symantec currently doesnt support Windows 2008 R2, only R1 so make sure you are using R1. Also, I could not get Windows 2008 to work until 6.5.4 which I installed from a single file that brought the server directly to that version. After using that install file it worked flawlessly.
Symantec most certainly DOES support 2008 R2
Client support for Microsoft Windows 2008 R2 begins from 6.5.5, now out!
See page 27:
NetBackup (tm) 6.x Operating System Compatibility List (Updated December 1 2009)
http://support.veritas.com/docs/325328
Dear Sir I have a 6.5.3
Dear Sir
I have a 6.5.3 master server (solaris 9) and connect Tape library with SCSI & SAN ( robot by scsi , Tape Driver by SAN) . Today I install a media server on windows 2008 sp2 x64 with NBU 6.5.2 x64. I can see all driver by SAN . But when I upgrade it to 6.5.3 that the Remote manager monitor server can't stop . I must kill the nbrmms process and the upgrade can go on.
When the installation is finish , I restart my 2008 server . But when I use tpconfig command there are no any respond . And I cant start the EMM service . And I use bpdown commend then the Remote manager monitor server can't stop .
Could anybody help me please ?
Would you like to reply?
Login or Register to post your comment.