Ghost Solution Suite

Hi Folks..

 

Does anyone have a tutorial on how to use the Recovery kit.  I've read the manual but I'm not exactly sure how to set up the recovery kit. Obviously I need 2 partitions - One with the OS on it and the other with the recovery Image of the OS partition. 

 

Bit stumped.  I can use GHOST without any problems but as I say, not sure on the proper way to install the recovery kit on my computer.

 

Many thanks

 

Declan

Hello

Here some tips

1 .- You need 2 partitions, OS and RECOVERY, make sure it is bootable in either DOS or WinPE, hence, to configure your interface and your scripts so that everything is automatic.
2 .- Make sure to register your copy of ghostoem as stated in the manual and completing other data with the parameters-oempname,-oemspan, etc etc

Hi there!

Here is a step-bt-step guide to using it:

Using the Ghost Recovery Kit from start to finish
http://service1.symantec.com/SUPPORT/on-technology.nsf/293a5302ae81e39288256ebb0049cfe7/c4faa95a6726802f8825743c0054a009?OpenDocument

This should cover everything you need to know. Good luck!

Thank you,

Randy