Migrate DA 9.0 SP1 to version 10
Created: 26 Sep 2012 | Updated: 07 Nov 2012
Hi all,
I am in the middle of migration planning to EV10. I got it all covered with exception of DA. I am unable to find any guide that explains how to migrate DA 9.0 SP1 revision 23 to version 10. Would you know where I can find such a guide?
Thanks!
Quick Look Solution
You will want to use these
You will want to use these steps to move DA and then upgrade.
How to move Compliance Accelerator (CA) or Discovery Accelerator (DA) to a new server
| Article:TECH55065 | | | Created: 2007-01-29 | | | Updated: 2012-10-09 | | | Article URL http://www.symantec.com/docs/TECH55065 |
Comments
Here you will find the
Here you will find the DAUpgradeInstructions_en.htm.
This document explains how to upgrade an existing installation of Discovery Accelerator to version 10.0.2.
Symantec Enterprise Vault Discovery Accelerator 10.0.2 - Release Notes and Upgrade Instructions
It is also part of the install media.
Tony Sterling
www.bluesource.net or www.bluesource.co.uk
Offices in the US and the UK
Yeah, read the doc carefully
Yeah, read the doc carefully as you are not eligible for DA10.1 or 10,2 upgrade.
Good spot CareFreeX! Raf999,
Good spot CareFreeX!
Raf999, you will need to first go to DA 9 sp 4 or DA 10 or DA 10 sp 1. In the Upgrade Instructions you will find this:
Supported upgrade paths
You can upgrade to Discovery Accelerator 10.0.2 from the following versions only:
For the latest information on supported upgrade paths, see the technical note called Supported upgrade paths for Enterprise Vault, Compliance Accelerator, and Discovery Accelerator (http://www.symantec.com/docs/TECH53174).
Tony Sterling
www.bluesource.net or www.bluesource.co.uk
Offices in the US and the UK
OK, so, we should be able to
OK, so, we should be able to go to 10.0.1. However, there is another complication, and that is the current DA server is running on windows 2003. The DAUpgradeInstructions_en.htm which is what I am working with only mentions an in-place upgrade (you login to server, you run the .msi, etc.) which is fine if the server to be upgraded is already running Windows 2008, but that's not the case.
Can DA 10.0.1 run on Windows 2003? If not, could you tell me where I can find migration instructions to migrate to Windows 2008 first?
You will want to use these
You will want to use these steps to move DA and then upgrade.
How to move Compliance Accelerator (CA) or Discovery Accelerator (DA) to a new server
Tony Sterling
www.bluesource.net or www.bluesource.co.uk
Offices in the US and the UK
Would you like to reply?
Login or Register to post your comment.