Video Screencast Help

Move SEP From SEPM11 to SEPM12 client not allow UNC path

Created: 18 Jun 2014 • Updated: 22 Jun 2014 | 4 comments
Jakawut.Ch's picture
This issue has been solved. See solution.

Hi , I install new SEPM version 12, I need to move client from old sever SEPM11 (not upgrade)

I use Clients deployment wizard > Comminication update Package deplyment > select group > remote push > select client > define login credentils (Domain Admin)

In Deployment summary 5 client can deploy, 9 client can't deploy (Deployment status red cross,Communication update status red cross)


I check with KB

found client fail to deploy not allow Administrative Shares (hardening) share, but i can manually sylink.xml (smc -stop copy sylink smc -start)

have another way to push deployment ? , Security team not allow to enable Administrative Shares

Operating Systems:

Comments 4 CommentsJump to latest comment

ᗺrian's picture

This is needed so you will need to manually replace the sylink

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

technical_specialist's picture

Can you ping these pending clients are in network?

Firewall service require to disable for the deployment.

Administrative share is require for the deployment remotely.

Replace the sylink manually.

SMLatCST's picture

The admin share is a mandatory requirement of using the Client Deployment Wizard, without those locked down by policy, you'll have to look into other means.

Your options include:

Lots of possibilities (and many more I;ve not mentioned) laugh