NBU / OS Not controlling Robotics since library upgrade
We upgraded our library from ADIC i2k to Quantum i6k and associated LTO3 to LTO5 drives.
All looks good excpet the robotics are no longer controllable and the cfgadm command produces a failing message.
We're running on Solaris 10 sparc and NBU 18.104.22.168
# cfgadm -al -o show_FCP_dev
Ap_Id Type Receptacle Occupant Condition
c3 fc-fabric connected configured unknown
c3::500308c001d41002,0 tape connected configured unknown
c3::500308c001d41002,1 unavailable connected configured failing
c3::500308c001d41008,0 tape connected configured unknown
c3::500308c001d4100e,0 tape connected configured unknown
c3::500308c001d41014,0 tape connected configured unknown
The drives are directly attached to a SAN brocade and the control path is set on drive 1 as above.