Video Screencast Help

NBU Status Code 58

Created: 04 Nov 2012 • Updated: 09 Jan 2013 | 4 comments
vamsivaddi's picture
This issue has been solved. See solution.

Hi,

I am havin an issue with Client connectivity.

NBU Master and Media 7.1 Solaris 10

Client Windows 2008

1. Can ping via hostname from Client as well as master server.

Please find attached the logs for more info on the error... please let me know ifyou need more details.......

 

 

 

 

Comments 4 CommentsJump to latest comment

mph999's picture

On the client ajvadc02 make sure there is an SERVER entry for the media server.

host properties > clients > servers

Add the name of the media server, and make sure the client can fully resolve the media servers name, both forwards and reverse lookups.

Ensure the media server can fully resolve the hostname of the client.

Also check for any firewalls ...

Confirm that the following services are running on the client:

NetBackup Client Service
NetBackup Legacy Client Service
NetBackup Legacy Network Service
Symantec Private Branch Exchange

Martin

 

Regards,  Martin
 
Setting Logs in NetBackup:
http://www.symantec.com/docs/TECH75805
 
Marianne's picture

Your 'logs' do not show any name lookup from client's side?

Do 'bpclntcmd -hn <server-hostname>' as well as 'bpclntcmd -ip <server-IP>' on the client.

When name lookup looks good from client's side, test connectivity as follows:

1. Create bpcd log folder on client.

2. Run this command on server:
bptestbpcd -client <client-name> -verbose -debug.

If connection still fails, please post output of command as well as client's bpcd log.

If no log file is created in client's bpcd log folder, ensure client's Windows firewall is turned off and disabled.
Also verify if server or client is in DMZ. If so, ensure port 1556 is open in both directions.

PS: Why do you have SERVER entry for client ajvadc02 in master's bp.conf?
You need SERVER entry on client for the Master.

Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows
Handy NBU Links

SOLUTION
vamsivaddi's picture

HI Martin and Marrianie,

 

The backups are running now the firewall has been disabled on Client and now this can be able to connect.

What should i do to run the backups when the firewall is enabled.

Thanks & Regards,

Vamsi Krishna

Marianne's picture

As per my post above - comms on port 1556 is needed. You need to allow Private Branch Exchange.

PS: why do you need Windows Firewall if your servers are protected by your company's external firewall?

Supporting Storage Foundation and VCS on Unix and Windows as well as NetBackup on Unix and Windows
Handy NBU Links