NDMP backup failes with 219 error code
Updated: 22 May 2010 | 5 comments
Hi All,
I am managing a Sun Server with Solaris 5.8 on which Veritas Netbackup 4.5 Datacentre is installed. We have configured NDMP backups on the same and it was working fine for sometime too. Recently we rebooted the system. After that all the other backups are running fine except the NDMP backups. When i fire a NDMP backup it fails in a flash with 219 error code. All the drives are up and running. But the backup still fails.
Please help me on the same.
Regards,
Athreya
discussion Filed Under:
Comments
Hi,
Verify that the robot number and host in the storage unit configuration matches what
is specified in the Media Manager device configuration and also ensure the max concurrant jobs is not set to 0
Oops, Maximum concurrent drives
Recycle Once !!
Recycle Netbackup services on Master server Once , will resolve this issue !!
Drives Down and bpsched logs
Check if the NDMP drives assign to this filer are up and healthy in all the ways, if they are go to the master server under the bpsched logs and grep for "available drive" this will give you the list of STU and if you see the one where the NDMP drives are stored with 0 0 0 means that bpsqued thinks that all the drives are down, you will need to:
bpschedreq -read_stunits
if after this you still see the logs with 0 drives assign to the STU than you have a problem with the drives and media server who controls the medias, this of course if u are under a remote-ndmp config, if you are in a 3way-ndmp or single-ndmp the troubleshooting goes between the filer and the drives.
hope this helps.
regards.
Omar A Villa
Netbackup Expert
These are my personal views and not those of the company I work for
Would you like to reply?
Login or Register to post your comment.