Netbackup 7.5 - 5220 Appliance and NBAC - Access Control
I have a configuration with 1 x V7504 Master Server and 1 x 5220 Media Server (N251). I have completed configuration and testing of the environment and am now locking it down with NBAC.
I configured the Master Server end of things (bpnbaz -setupmaster) and all was well. I restarted the services on the Master.
I then did a bpnbat -login, followed by a 'bpnbaz -setupmedia <5220 media server name> -dryrun' which ran OK, then I repeated without the -dryrun. The /usr/openv/var/vxss/AzHandleCache.data was not present on the appliance, so a restart of the appliance was then done to activate changes. The Autohorization is set to AUTOMATIC (not REQUIRED yet).
Following all of this I can backup to the appliance but when I try and select the properties of the media server (appliance) it fails to connect with the message INTERNAL APPLICATION ERROR. I cannot therefore get to the properties of the appliance media server.
Any ideas where I have gone wrong / what I have missed ?
AJ
Comments 1 Comment • Jump to latest comment
One additional point to note, when I RMC on the 5220 Media Server in the host properties / media server section and select REFRESH SELECTED then it correctly populates all of the fields on the screen (O/S, O/S Type, Host Type, Version) and gives a status of connected - so it is 'talking' to the 5220 appliance. However, if I RMC and select PROPERTIES or simply double click the 5220 media server I get the error INTERNAL APPLICATION ERROR....
AJ
Would you like to reply?
Login or Register to post your comment.