Netbackup master 7.1 with Netbackup client 6.0
Created: 28 Aug 2012 | Updated: 07 Oct 2012
Hello
We plan to upgrade our Netbackup Master to 7.1.0.3
Our domain consist of the following :
Master : NBU 6.5.6
clients with sap : NBU 6.0
From the official NBU installation guide say that we can use 7.x master with 6.0.x client. But it is not indicate about sap/db agent.
Can we upgrade NBU master to 7.1.0.3 first, while leave the client (sap) at 6.0.
Thank you.
Quick Look Solution
I have done many tests with
I have done many tests with file system backups but as you say the guide does not mention db agents.
As V6 is unsupported now - even 6.5 is going out of support in October - you would need to go to 7.1 to actually get it supported
The only way really is to try it - it should work but if you have issues you will not get any support
Comments
I have done many tests with
I have done many tests with file system backups but as you say the guide does not mention db agents.
As V6 is unsupported now - even 6.5 is going out of support in October - you would need to go to 7.1 to actually get it supported
The only way really is to try it - it should work but if you have issues you will not get any support
Authorised Symantec Consultant
Don't forget to give a "Thumbs Up" or mark as "Solution" if someones advice has helped you.
Flat file backups may work
Flat file backups may work fine with Master\Media and client version mismatch.
But if you are backing up databases than its recommended to use client & master\media of same
version.
Amol
We have some clients that
We have some clients that host the old os version. So we cannot upgrade nbu client to 7.x
Even if somehow backups work,
Even if somehow backups work, there is no gaurantee the restores will work fine.
Amol
At keast get the clients up
At keast get the clients up to 6.5.6 (hope fully your clients are supported with that?)
You should then do backup and restore tests to see if they work - after all, a backup is only any use if it can be restored
Hope this helps
Authorised Symantec Consultant
Don't forget to give a "Thumbs Up" or mark as "Solution" if someones advice has helped you.
With 6.x EOL this month, I
With 6.x EOL this month, I would high reccomned to get all servers involved to 7.x as soon as possible.
Just confrim that the the OS and database agents are cerfied with 7.x.
http://www.symantec.com/docs/TECH74757 - NetBackup Product Family Support LifeCycle Schedule
http://www.symantec.com/docs/TECH126904 - NetBackup (tm) 7.x Database Agent Compatibility
http://www.symantec.com/docs/TECH76648 - NetBackup (tm) 7.x Operating System Compatibility List
Would you like to reply?
Login or Register to post your comment.