Netbackup RAC Restore - error 59 access to client not allowed
I have been looking at many similar posts, checking my config, and still cannot seem to get this working.
I have a config with a W2K8R2 Master server, a W2k8R2 media server and a 5220 Appliance. I have added a number of Remote Admin Consoles to remove the need for Ops to RDP onto the master server for management.
I have added the RAC PC names to the Master Server SERVER list and to the SERVER list on ALL clients. I have added the media servers into the SERVER list on the RAC PC's (they are already on the clients SERVER list). I have added the RAC PC names to the Media Server SERVER list.
I still have the issue that when I start a restore I get an error as follows:
12/04/2013 16:18:00 - begin Restore
12/04/2013 16:18:03 - restoring image aaaaa238_1365714929
12/04/2013 16:18:03 - Info bprd(pid=9032) Restoring from copy 1 of image created 04/11/13 22:15:29
12/04/2013 16:18:03 - requesting resource @aaacp
12/04/2013 16:18:03 - granted resource MediaID=@aaacp;DiskVolume=PureDiskVolume;DiskPool=dp_disk_xxxxxx-yyyy;Path=PureDiskVolume;StorageServer=xxxxxxx-yyyy;MediaServer=xxxxxxx-yyyy
12/04/2013 16:18:05 - Info bpbrm(pid=31488) aaaaa238 is the host to restore to
12/04/2013 16:18:05 - Info bpbrm(pid=31488) reading file list from client
12/04/2013 16:18:06 - Error bpbrm(pid=31488) bpcd on RACPC.domain.name exited with status 59: access to the client was not allowed
12/04/2013 16:18:06 - Error bpbrm(pid=31488) cannot put rename file on aaaaa238
12/04/2013 16:18:06 - Info tar(pid=0) done. status: 59: access to the client was not allowed
12/04/2013 16:18:06 - Error bpbrm(pid=31488) client restore EXIT STATUS 59: access to the client was not allowed
12/04/2013 16:18:06 - restored image aaaaa238_1365714929 - (access to the client was not allowed(59)); restore time 00:00:03
12/04/2013 16:18:09 - Warning bprd(pid=9032) Restore must be resumed prior to first image expiration on 18/04/2013 22:15:29
12/04/2013 16:18:11 - end Restore; elapsed time: 00:00:11
MS-Windows policy restore error(2808)
After all the changes to the SERVER lists I have restarted NBU services on the Master / Media / RAC PC / client being tested - no joy.
What am I missing ?