Hi

You can go for multiple streaming option which will minimize the backup timings .

Also you had tuned the buffer values .

http://support.veritas.com/docs/281842

http://support.veritas.com/docs/244652http://support.veritas.com/docs/183702

The NetBackup 6.5 Backup Planning and Performance Tuning Guide has advice for how to tune for performence.

Update network driver on backup server and client has first step, can make a BIG diffrence. Makre sure no antivirus software scan all files being backedup. Configure NUMBER_DATA_BUFFERS and SIZE_DATA_BUFFERS if not already done (on media servers).

It is not the size of the backup that matters (in this case), but the number of files involved.  If you are doing a "standard backup" with millions of files, then NBU is retrieving a file at a time.  If the volume is fragmented, then Windows is having to hunt all over the disk to get that 1 file.  Once done, onto the next file, with the same consequences.

If you have a large number of files, you may want to consider the NBU FlashBackup facility.  This performs a "raw disk" backup with the ability to do individual file restores.  In our case, we have a 1.6TB volume with 4+ million files.  Backup time was approximately 72 to 90 hours.  With NBU Flashbackup, we are down to 10 hours. 

A single file restore from a FlashBackup image works just like any other single file restore (I do this ALL the time).  Just make sure on the restore, you tell NBU to get the data from a FlashBackup image...

Excerpt from:

DOCUMENTATION: How to configure backup for maximum throughput when a volume or folder contains millions of small files.

"...
If FlashBackup is not an option, a Windows 2000 client with VERITAS Snapshot Provider (VSP) (or Windows 2003 with VSP or Volume Shadow copy service (VSS)) can be configured to perform raw partition backups using a snapshot. This will allow the volume to be accessed while a backup is running, but give the performance of a raw partition backup.

However, there is no ability to restore individual files. In order to restore individual files from this volume, the entire volume must be restored, and then the files can be copied to where they are needed.
..."

Plz go thru this link:

http://eval.veritas.com/downloads/pro/flashbu_r3_w...