Video Screencast Help
Give us your opinion and win with Symantec! Please help us by taking this survey to tell us about your experience with Symantec Connect, so that we can continue to grow and improve.  Take the survey.

Netware 65 SP8 - after applying it Backupexec resets the computer

Created: 18 Jun 2009 • Updated: 21 May 2010 | 2 comments
calil's picture
Is there anything to do ?
I have the last patch of Backupexec BENW9.2.1401.5_287839, but it still resets the computer.
I have already reinstalled the product, but it still resets the computer.
It happened on a Dell and on a IBM server.

What should I do , will be done a fix for that ?

Comments 2 CommentsJump to latest comment

Steve W.'s picture

Looking at the SCL for Backup Exec 12.5 Netware 6.5 SP8 is not supported with the Netware agent.

If this response answers your concern, please mark it as a "solution"

MartinioLu's picture

Hi Calil,

there is a simple solution for this:

in Netware enter in the Console Prompt: edit - press insert and go to


Check if the command "LOAD NWTAPE.CDM" is there - if yes rem it out
Additionally add the command:
Set Auto Load of CDM Modules = OFF

Next go to C:\nwserver\drivers and search for the nwtape.cdm - rename it like e.g. "nwtape.cdmold"

This should solve everything!