Network Card - Speed
Updated: 16 Oct 2011 | 3 comments
This issue has been solved. See solution.
Hi Guys,
Does anyone know if its possible for us to be able to see what speeds the Network Cards are set to?
Full Duplex/ 10/100 or Gigabyte? We'd like to be able to see how many of our Desktops have the wrong setting....
Tried to see if this was an additonal option to be collected by Inventory but doesnt seem to be an option...
Cheers
Discussion Filed Under:
Group Ownership:
Comments
Should be gathered
It should be gathered by inventory, but all computers are different. Do you see any data in the Inv_HW_Network_Adapter table in the Full Duplex column?
If not, this KB refers to WMI query custom inventory samples. In this case, you'd run a custom inventory using the WMI scripts provided to populate a custom data class you create for speed and duplex.
http://www.symantec.com/docs/TECH39513
Mike Clemson, Senior Systems Engineer
Intuitive Technology Group -- Symantec Platinum Partner
Intel NIC WMI reference guide
If the CMDB doesn't contain the information and you have Intel NICs, take a look at the WMI scripts reference doc - http://downloadcenter.intel.com/Detail_Desc.aspx?strState=LIVE&DwnldID=9405
The opinions expressed on this site are mine alone and do not necessarily reflect the opinions or strategies of Intel Corporation or its worldwide subsidiaries
Thanks guys,
This has helped. I see Altiris 7.1 has this info built into the Inventory
Cheers
Would you like to reply?
Login or Register to post your comment.