Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

NTP Support

Created: 18 Jun 2012 • Updated: 20 Oct 2012 | 12 comments
This issue has been solved. See solution.

HI Team,

Please suggest on below servers for NTP component of SEP 11 is supported or not.

OS: Windows Storage Server 2008 R2 Standard

Bit: 64 bit

Comments 12 CommentsJump to latest comment

Chetan Savade's picture

Hi,

It's supported.

Go through attached System requirement guide for more details.

AttachmentSize
Installation_Guide_SEP11.0.6.pdf 2.15 MB

Chetan Savade
Sr.Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

Anil kondalkar's picture

Hi pete,

My SEPM version is 11.0 .

OS: Windows Storage Server 2008 R2 Standard

Bit: 64 bit

this upper server can support or not for the NTP component SEP 11.0

If not so what is solution for this.

Chetan Savade's picture

Hi,

You should upgrade to latest version i.e SEP RU7 MP3.

Check till date SEP releases.

https://www-secure.symantec.com/connect/articles/what-are-symantec-endpoint-protection-sep-versions-released-officially

Latest SEP versions does support Server 2008 R2.

 

Chetan Savade
Sr.Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

Anil kondalkar's picture

Hi chetan

 NTP is enable or disable on Windows Storage Server 2008 R2 Standard 64 bit.

can you give me Symantec recommanded docx for this .

My SEPM version is 11.0 MR4 Mp2

 

 

Chetan Savade's picture

Hi,

You should upgrade SEPM and SEP clients to the latest version.

Chetan Savade
Sr.Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

pete_4u2002's picture

the SEP client should be the lateste version, ofcourse the SEPM should also be upgraded. THe NTP can be enabled.

Anil kondalkar's picture

Hi Team,

in my sepm 11.0 MR4 MP2.

NTP is Supported or not on Windows Storage Server 2008 R2 Standard 64 bit.

Chetan Savade's picture

Hi Anil,

It's not supported. You can check RU4 system requirements. 

http://www.symantec.com/docs/TECH91475 

It's supported from SEP RU5 onwards.

Check RU5 System requirements.

http://www.symantec.com/docs/DOC2357 

Chetan Savade
Sr.Technical Support Engineer, Endpoint Security
Enterprise Technical Support
CCNA | CCNP | MCSE | SCTS |

Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<

SOLUTION
Mohan Babu's picture

There is no document in symantec stating that NTP is not supported in Windows Storage Server 2008 R2 Standard 64 bit.

We have Best practices to install SEP on Windows Servers. however you may face Slow network issues if you install NTP on Windows Storage Server 2008 R2 Standard 64 bit.

 

So kindly Dont install NTP on Windows Storage Server 2008 R2 Standard 64 bit.

 

Mohan Babu

moglie20@gmail.com

+91 9884382160

Your satisfaction is very important to us.If you find above information helpful or it has resolved your issue...please mark it accordingly :)