Video Screencast Help
Symantec to Separate Into Two Focused, Industry-Leading Technology Companies. Learn more.

Opscenter 7.5 AT service down

Created: 02 Apr 2013 • Updated: 21 Oct 2013 | 9 comments
RickAndrei's picture
This issue has been solved. See solution.

Hi All,

 

I open a case to Symantec and I did the recommendations base on the technote that Symantec support provided to be able to up the AT service.

I encountered an error in the second command.

http://www.symantec.com/docs/TECH187929

  1. Configured Authentication service to start in Root + Authentication Broker (AB) mode 3

/opt/VRTSat/bin/vssat showbrokermode    showed mode 0 ( not configured)
/opt/VRTSat/bin/vxatd -a -r -o start Authentication service is root + AB mode
/opt/VRTSat/bin/vssat showbrokermode  is now 3 (Root + AB  broker mode as expected)

 

 

We did a webex session but it wasn't resolve the issue Support just collected logs for further analysis.

 

 

Operating Systems:

Comments 9 CommentsJump to latest comment

Mark_Solutions's picture

Can you post the vxat.log file on here for us to see please

Wondering if it is not believeing it is properly installed - see this tech note:

http://www.symantec.com/docs/TECH147534

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

SOLUTION
RickAndrei's picture

Hi Mark

I check on the technote that it is similar to the issue I'm facing with Opscenter especially the content of the vxatd.log

See the content of the vxatd.log below: check on the bold font

 

(9044196|1) Initializing Broker Configuration.
(9044196|1)CAuthPam::exception Unable to open file; err 24604
(9044196|1) Loaded all plugins successfully.
(9044196|1) Failed to open file </var/VRTSat/.VRTSat/profile/certstore/keystore/RBPrivKeyFile.pem>. [utils.cpp(1238)]
(9044196|1) Key pair doesnt exist in the broker keystore
(9044196|1) Generated new key pair and saved in files </var/VRTSat/.VRTSat/profile/certstore/keystore/RBPubKeyFile.pem> and </var/VRTSat/.VRTSat/profile/certstore/keystore/RBPrivKeyFile.pem>.
(9044196|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(9044196|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(5832868|1) Initializing Broker Configuration.
(5832868|1)CAuthPam::exception Unable to open file; err 24604
(5832868|1) Loaded all plugins successfully.
(5832868|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(5832868|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(7864402|1) Initializing Broker Configuration.
(7864402|1)CAuthPam::exception Unable to open file; err 24604
(7864402|1) Loaded all plugins successfully.
(7864402|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(7864402|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(7012538|1) Initializing Broker Configuration.
(7012538|1)CAuthPam::exception Unable to open file; err 24604
(7012538|1) Loaded all plugins successfully.
(7012538|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(7012538|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(8061060|1) Initializing Broker Configuration.
(8061060|1)CAuthPam::exception Unable to open file; err 24604
(8061060|1) Loaded all plugins successfully.
(8061060|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(8061060|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(8454292|1) Initializing Broker Configuration.
(8454292|1)CAuthPam::exception Unable to open file; err 24604
(8454292|1) Loaded all plugins successfully.
(8454292|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(8454292|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(6488264|1) Initializing Broker Configuration.
(6488264|1)CAuthPam::exception Unable to open file; err 24604
(6488264|1) Loaded all plugins successfully.
(6488264|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(6488264|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(6291650|1) Initializing Broker Configuration.
(6291650|1)CAuthPam::exception Unable to open file; err 24604
(6291650|1) Loaded all plugins successfully.
(6291650|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(6291650|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(3735722|1) Initializing Broker Configuration.
(3735722|1)CAuthPam::exception Unable to open file; err 24604
(3735722|1) Loaded all plugins successfully.
(3735722|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(3735722|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(4915234|1) Initializing Broker Configuration.
(4915234|1)CAuthPam::exception Unable to open file; err 24604
(4915234|1) Loaded all plugins successfully.
(4915234|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(4915234|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(4915308|1) Initializing Broker Configuration.
(4915308|1)CAuthPam::exception Unable to open file; err 24604
(4915308|1) Loaded all plugins successfully.
(4915308|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(4915308|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(6947062|1) Initializing Broker Configuration.
(6947062|1)CAuthPam::exception Unable to open file; err 24604
(6947062|1) Loaded all plugins successfully.
(6947062|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(6947062|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(7077986|1) Initializing Broker Configuration.
(7077986|1)CAuthPam::exception Unable to open file; err 24604
(7077986|1) Loaded all plugins successfully.
(7077986|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(7077986|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(7077994|1) Initializing Broker Configuration.
(7077994|1) Loaded all plugins successfully.
(7077994|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(7077994|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(7077998|1) Initializing Broker Configuration.
(7077998|1) Loaded all plugins successfully.
(7077998|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(7077998|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(3539090|1) Initializing Broker Configuration.
(3539090|1) Loaded all plugins successfully.
(3539090|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(3539090|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(3539100|1) Initializing Broker Configuration.
(3539100|1)CAuthPam::exception Unable to open file; err 24604
(3539100|1) Loaded all plugins successfully.
(3539100|1) Failed to open file </etc/resolv.conf>. [utils.cpp(1238)]
(3539100|1) Error: 24604 - Unable to open file in utils.cpp(1239)
(12648612|1) Initializing Broker Configuration.
(12648612|1)CAuthPam::exception Unable to open file; err 24604
(12648612|1) Loaded all plugins successfully.
(12648612|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(12648612|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(11927712|1) Initializing Broker Configuration.
(11927712|1)CAuthPam::exception Unable to open file; err 24604
(11927712|1) Loaded all plugins successfully.
(11927712|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(11927712|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(13369506|1) Initializing Broker Configuration.
(13369506|1)CAuthPam::exception Unable to open file; err 24604
(13369506|1) Loaded all plugins successfully.
(13369506|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(13369506|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(11927716|1) Initializing Broker Configuration.
(11927716|1)CAuthPam::exception Unable to open file; err 24604
(11927716|1) Loaded all plugins successfully.
(11927716|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(11927716|1) Error: 24609 - Broker not configured. in server.cpp(1018)
(13369520|1) Initializing Broker Configuration.
(13369520|1)CAuthPam::exception Unable to open file; err 24604
(13369520|1) Loaded all plugins successfully.
(13369520|1) Invalid AB configuration - cannot get configurationfrom CLI or local config
 
Usage: 
 
   vxatd [-r] [-a] [-d<level>] [-o]
   vxatd  -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> [-p <passwd>] [ -z <port> ] [-x <domtype>]  [-w] [-o]
 
  -r: Run the broker in Root Broker mode.
  -a: Run or Configure the broker in Authentication Broker mode.
  -o: Key generation mode only. Broker will generate keys and exit.
  -d: Running the broker in foreground mode as a regular application with specified debuglevel that can run from <1-5>
  -w: Renew the broker credential(s).
  -n: Authentication Broker principal name.
  -p: Password for the Authentication Broker principal. If -p is not provided,user will be prompted for the password.
  -y: Domain name in the Root Broker under which the Authentication Broker principal exists.
  -x: Domain type of the above mentioned domain in Root Broker. This should always be 'vx'.This is optional arguement. 
  -q: Remote Root broker hostname.
  -z: Remote Root broker port number.Usually the value for this is 2821. If this option is not given, 2821 is used as default.
  -h: Absolute path of root broker hash file.
 
 
Examples:
       vxatd -r -a  <Configures the broker in in R+AB mode and starts the broker.>
       vxatd -a -n <prpl> -y <domainname> -q <brokerhost> -h <file> -z <port> <Configures and Starts the broker in AB only mode>
       vxatd        <Starts the already configured broker>(Valid only on Unix).
       vxatd -d5    <Starts the already configured broker in foreground mode with full verbose level.>
(13369520|1) Error: 24609 - Broker not configured. in server.cpp(1018)
 
Mark_Solutions's picture

Looks very similar - have you tried the re-installation as shown at the end of the tech note?

Authorised Symantec Consultant

Don't forget to "Mark as Solution" if someones advice has solved your issue - and please bring back the Thumbs Up!!.

RickAndrei's picture

not yet mark i will try to reinstall it later. according to symantec support aix 7.1 does not support opscenter 7.5.0.0 minor release but the installation went successfully.

Yasuhisa Ishikawa's picture

Any change did you run "/opt/VRTSat/bin/vxatd -a -r -o start"? If so, try "/opt/VRTSat/bin/vxatd -a -r -o".

Authorized Symantec Consultant(ASC) Data Protection in Tokyo, Japan

RickAndrei's picture

Hi Mark,

Here's the results of that command:

failed to open file </opt/securetty>

 

Upon checking securetty does not exist in AIX OS, it is applicable to Linux or other Unix box.

Yasuhisa Ishikawa's picture

I suppose what you see is "Failed to open file </etc/securetty>. [utils.cpp(1238)]".

Once create empty /etc/securetty file, and run again. After the command completed ,delete /etc/securetty.

Authorized Symantec Consultant(ASC) Data Protection in Tokyo, Japan

RickAndrei's picture

Hi Yasuhisa,

 

Actually I created an empty securtty file

the command /opt/VRTSat/bin/vxatd -a -r -o start was successfull
however when i run the /opt/VRTSat/bin/vssat showbrokermode (the results still 0 instead of 3)

Yasuhisa Ishikawa's picture

Please check if vxatd is not running while these operations. If running, once stop it and try the procedure again.
Or, ask what to do to Symantec in your existing case.

Authorized Symantec Consultant(ASC) Data Protection in Tokyo, Japan