Organizational views
Updated: 21 May 2010 | 3 comments
Hi
I am new on here and very new to altiris.
I have managed to set up a group below an organization and set up a job, to push machines into the group based on IP address.
but my question, is can i change how the information is presented. at the moment in the group it shows, 'name', 'Organizational Group', 'Source' and 'resource type' but i wat it to display the IP Address and Is managed boxes just like it was in the old collections.
Thanks
Rob
discussion Filed Under:
Group Ownership:
Comments
This might be a tough order
The custom organizational views\groups are all static. So, you are going to have to create a filter, based on IP address, and then assign it to your group. This will create the target for distribution, but I doubt it will show up the way you want to.
Jim Harings
HP Enterprise Services
1st Rule of Connect Club: Mark the post that helped you the most as a 'solution'. 2nd Rule of Connect Club:You must talk about Connect club.
Yeah thats what i have done,
Yeah thats what i have done, but wanted to change the default as i am deploying agents and wanted a quick view to see how the rollout is going.
Another work around...
You can also enable the AD Import to import Sites & SUbnets which will also perform an auto-associate for Subnet to Site. This import can also create collections based upon Subnets at the same time which may help in providing the built-in filters for IP addressing & roll-out.
There is one caveat... if your network uses super-netting at all, not all assets may be listed in the IP collection due to the limited abiltiy of the NS to calculate out the subnet. It is explained here: https://kb.altiris.com/article.asp?article=32046&p=1
Benjamin Palmer
Specialist | Client Design
Director | Symantec CT User Group
If you find this post helpful please give it a thumbs up!
If you find that this solves your problem please mark it as the solu
Would you like to reply?
Login or Register to post your comment.