Planning Installation
Created: 20 Feb 2013 | Updated: 20 Feb 2013 | 6 comments
This issue has been solved. See solution.
Hello everyone.
I am not sure if I am in correct forums asking for assistance.
We are planning for installation of SEP on our infrastucture.
Do you all have any document which I could check before I proceed?
or a must check before proceeding?
Discussion Filed Under:
Comments 6 Comments • Jump to latest comment
Hello,
Check these Articles:
Planning the installation http://www.symantec.com/docs/HOWTO55061
Network architecture considerations http://www.symantec.com/docs/HOWTO55114
Getting up and running on Symantec Endpoint Protection for the first time
http://www.symantec.com/docs/HOWTO55274
Quick Access to Symantec Knowledgebase Articles of Symantec Endpoint Protection 12.1
https://www-secure.symantec.com/connect/articles/quick-access-symantec-knowledgebase-articles-symantec-endpoint-protection-121
Downloadable Guides in reference to the Symantec Endpoint Protection 12.1 RU2
https://www-secure.symantec.com/connect/downloads/downloadable-guides-reference-symantec-endpoint-protection-121-ru2
and
SEPM 12.1 Fresh install with Embedded database - graphical overview
SEPM 12.1 Fresh install with SQL database - graphical overview
SEP 11.x to SEP 12.1 Upgrade process graphical overview
Also, check this Thread with Similar Issue -
https://www-secure.symantec.com/connect/forums/sepm-infrastructure-planing-and-designing
Hope that helps!!
Mithun Sanghavi
Symantec Technical Support Engineer, SEP
MIM | MCSA | MCTS | STS | ITIL v3
Twitter: @mithun_sanghavi
Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<&a
You need to cosider lot of things, all the above documents give you good overview of it
how many clients do you have?
are your clients in different locations?
Please don't forget to mark your thread solved with whatever answer helped you : ) Rafeeq
I agree mithun comments you can follow same +1
Thanks.
@rafeeq we have 5000 clients and more than 20 locations across india.
@mithun Articles are really helpful. i will check all of them
Hello,
Since you have multiple location's, check these Articles:
How To Optimize Endpoint Protection for Branch Offices using GUPs, Load Balancing, and Location Awareness
http://www.symantec.com/docs/TECH94122
Symantec Endpoint Protection Sizing and Scalability Best Practices White Paper
http://www.symantec.com/docs/DOC4448
and
Check this Thread:
https://www-secure.symantec.com/connect/forums/symantec-endpoint-protection-management-multi-site-setup
Hope that helps!!
Mithun Sanghavi
Symantec Technical Support Engineer, SEP
MIM | MCSA | MCTS | STS | ITIL v3
Twitter: @mithun_sanghavi
Don't forget to mark your thread as 'SOLVED' with the answer that best helps you.<&a
Ok. Thank you.
Would you like to reply?
Login or Register to post your comment.