Video Screencast Help
Give us your opinion and win with Symantec! Please help us by taking this survey to tell us about your experience with Symantec Connect, so that we can continue to grow and improve.  Take the survey.

Planning upgrade from SFHA 5.0 to SFHA 5.0MP3

Created: 11 Nov 2011 • Updated: 09 Dec 2011 | 1 comment
Yable's picture
This issue has been solved. See solution.

Hi all

I wonder if i will loose VVR configuration after this upgrade. Can i get some trouble with replication between 5.0 primary node and 5.0MP3 secondary node?

Thing in advance for your help.

Comments 1 CommentJump to latest comment

jdangelo_symc's picture

VVR does support differing versions of VxVM between the primary and the secondary.  That being said, you should always strive to keep the systems at the same level or a close as possible.  Moreover, the version differences allowed can be limited.  Please take a look at the following document on page 387

Also, please look at this older connect post.

Hope this helps,

Joe D